Clarity P-TEC S-525 빠른 매뉴얼

{카테고리_이름} Clarity P-TEC S-525에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarity P-TEC S-525 3 페이지. Voice paging speaker

페이지 인쇄

INTRODUCTION

Clarity P-TEC Voice Paging Speakers are suitable

for voice paging as well as background music.

The S-525 is a 70 Volt model with adjustable taps

and volume control. P-TEC speakers consist of a

3.6 inch cone speaker mounted in a unique

surface-mount baffle. The baffle is designed for

mounting on acoustic tile, such as those normally

found in suspended-ceilings; and can be mounted

without cutting large holes in the tile. The mount-

ing pins can be removed for mounting in a hard

ceiling. The speaker housing has screw holes for

securing speaker without mounting pins. Although

the P-TEC speakers are designed especially for

standard suspended ceilings, they can be used on

many types of ceiling materials. P-TEC speakers

are not suitable for use in plenum ceiling

environments.

DIMENSIONS/WEIGHT

• 8.00"Dia. x 2.50"D (20.32cm x 6.35cm)

1.25 lbs. (.57 kg)

INSTALLATION

Selecting the Power-Tap Wire

1. Remove the Quick-Connect connector from

the accessory pack.

2. Select the desired power-tap wire:

Yellow = 1/4 Watt

Red

= 1/2 Watt

Green = 1 Watt

White = 2 Watt

Blue

= 4 Watt

Note: Refer to spacing chart (Figure 6) for recom-

mended speaker spacing.

P-TEC VOICE PAGING SPEAKER

S-525

Figure 1. 70 Volt P-TEC Paging Speaker

3. Install the Quick-Connect connector on the

wire. Use pliers to close the connector over

the wire. The connector can be removed by

prying it open with a screwdriver, and can be

reused several times (See Figure 2).

Figure 2. Attaching the Reuseable Quick-Connect

Connector

Issue 1

Back Box (Optional)

Volume Control

Reusable

Quick-Connect

Connector

Tap Wire

947442