Xerox WORKCENTRE C2424 사용자 설명서 - 페이지 20

{카테고리_이름} Xerox WORKCENTRE C2424에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox WORKCENTRE C2424 43 페이지. Copier-printer
Xerox WORKCENTRE C2424에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (14 페이지), 브로셔 (8 페이지), 보충 설명서 (7 페이지), 사양 (6 페이지), 시작하기 매뉴얼 (26 페이지), 사용자 설명서 (21 페이지), 사용자 설명서 (20 페이지), 유지 관리 매뉴얼 (20 페이지), 사용자 설명서 (19 페이지), 사용 설명서 (16 페이지), 매뉴얼 (12 페이지), 사용 설명서 (6 페이지), 설치 매뉴얼 (4 페이지), 설치 매뉴얼 (2 페이지), 피드 롤러 키트 교체 (2 페이지), 설정 매뉴얼 (2 페이지), 자발적 제품 접근성 템플릿 (10 페이지), 경쟁사 비교 (3 페이지), 빠른 참조 매뉴얼 (14 페이지), 서비스 매뉴얼 (11 페이지), 빠른 참조 매뉴얼 (13 페이지)

Windows NT 4.x

This section includes:

■

"Preliminary Steps" on page 6-20

"Quick CD-ROM Install Steps" on page 6-20

■

"Other Methods of Installation" on page 6-21

■

"Windows NT 4.x Troubleshooting (TCP/IP)" on page 6-22

"infoSMART Knowledge Base Documents (English only)" on page 6-24

■

Preliminary Steps

These preliminary steps must be performed for all systems:

Verify that the system is plugged in, turned On, and connected to an active network.

Verify that the system is receiving network information by monitoring the LEDs on the

back of the device or on the CentreDirect External Print Server. When the system is

connected to a functioning network and receiving traffic, its link LED is green, and its

amber traffic LED is flashing rapidly.

Proceed to "Quick CD-ROM Install Steps" or "Other Methods of Installation" for the

installation method desired.

Print a "Configuration Page" and keep it for reference.

Quick CD-ROM Install Steps

Insert the WorkCentre C2424 Software CD-ROM into the computer's CD-ROM drive. If

the installer does not launch, do the following:

Click Start, then click Run.

In the Run window, type: <CD drive>:\INSTALL.EXE.

Select your desired language from the list.

Select Install Device Driver.

Click I Agree to accept the Xerox Software License Agreement.

In the Select Device dialog box, the default Use Walk-Up Technology (recommended

for network systems) is selected. Click Next.

Follow the Use Walk-Up Technology instructions displayed.

Click Exit Program.

Note

If the Walk-Up Technology dialog box remains onscreen after you have completed

Steps 1–6, click the Back button, then click Select from the following discovered

printers. Follow the onscreen prompts to complete the installation procedure.

For more information, go to the table of

this section.

infoSMART Knowledge Base documents

WorkCentre® C2424 Copier-Printer

6-20

Windows NT 4.x

at the end of