Xerox DocuColor 240 빠른 시작 매뉴얼

{카테고리_이름} Xerox DocuColor 240에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox DocuColor 240 2 페이지. Printer-copier
Xerox DocuColor 240에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (47 페이지), 설치 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 릴리스 노트 (34 페이지), 하드웨어 교체 매뉴얼 (2 페이지), 설정 매뉴얼 (6 페이지), 복사용 소책자 생성 (2 페이지), 시스템 설정 목록 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 평가자 매뉴얼 (20 페이지), 평가자 매뉴얼 (18 페이지)

Xerox DocuColor 240 빠른 시작 매뉴얼
1
17
16
15
14
12
11
10
13
2
3
4
5
6
7
8
9
Control Panel - 1 of 2
No.
Component
Function
1
Touch Screen
This display displays messages required for operation and buttons for various
features. You can directly touch the touch screen to instruct operations in screens and
set features.
2
<Copy>
Used to call a custom feature.
<Custom 2>
<Custom 3>
3
<All Services>
Used to display the [All Services] screen.
In text descriptions, this button is indicated as the <All Services> button. You can
change the features that appear in the [All Services] screen.
4
<Power Saver>
If the machine is not operated for a while, the machine's power consumption is
lowered to enter the Power Saver mode. In the Power Saver mode, this button is lit.
To cancel the Power Saver mode, press this button again. In text descriptions, this
button is indicated as the <Power Saver> button.
5
<Clear All>
Returns the statuses of all displayed services to their default values. The machine
will be reset to the state after it is turned on. In text descriptions, these buttons are
indicated as the <Clear All> button.
6
<Interrupt>
Select this button to temporarily stop a continuous copy job or printing to give anoth-
er job higher priority. During an interrupt, the Interrupt indicator is lit. Pressing the
Interrupt button again cancels the interrupt and the previous operation is resumed. In
text descriptions, this button is indicated as the <Interrupt> button.
7
<Stop>
Press this button to stop the current copy job or communications. In text descrip-
tions, this button is indicated as the <Stop> button.
8
<Start>
Press this button to start copying or scanning.
In text descriptions, this button is indicated as the <Start> button.
9
Numeric keypad
Press these buttons to enter the number of copies, passwords and other numerical
values. In text descriptions, these buttons are indicated as the "numeric keypad".
10
<C> (Clear)
Press this button if you have entered a wrong numerical value with the numeric
keypad. In text descriptions, this button is indicated as the <C> button.
11
<Log In/Out>
When this button is pressed, if in System Administration mode, or Login Setup/
Auditron Administration is in effect, the UserID input screen is displayed. In text
descriptions, this button is indicated as the <Log In/Out> button.
12
<Machine Status>
Pressing this button allows you to confi rm the machine status, meters and the state of
consumables, and print reports.
In text descriptions, this button is indicated as the <Machine Status>button.
13
<Review>
Press this button to open the Review screen. In this screen, you can check a list of
the status of copy and scan features whose settings have changed from the defaults.
You can also check the destination information for sending e-mail.
In text descriptions, these buttons are indicated as the <Review> button.
14
<Job Status>
Pressing this button allows you to confi rm or cancel currently executing or com-
pleted jobs, or to confi rm or print saved documents. In text descriptions, this button
is indicated as the <Job Status> button.
15
Brightness dial
Adjusts the brightness of the touch screen. Use this dial to adjust the brightness of
touch screen when it is too dark to read.
16
<Job in Memory>
This indicator lights when data is stored in the machine's memory.
indicator
17
<Online> indicator
This indicator lights when data is being transmitted from this machine or received
from a client.