Clarity S-505 빠른 매뉴얼 - 페이지 2

{카테고리_이름} Clarity S-505에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarity S-505 2 페이지. Interior speakers

페이지 인쇄

Coverage

Ceiling Speakers (S-500 and S-500VC):

The area covered by a ceiling speaker is determined by

the height of the ceiling. If the ceiling height is 8 feet, the

speaker will cover 250 square feet. With a ceiling height

of 9 to 15 feet, the speaker will cover 400 square feet. If

the ceiling is 16 to 35 feet high, the speaker will cover

850 square feet.

Wall Speakers (S-505 and S-505VC):

These wall speakers will cover an area up to 600 square

feet. Wall speakers should be spaced 20 feet apart, with

good quality paging being heard up to 30 feet in front of

the speaker.

The volume control on the S-500VC and S-505VC allows

the volume level to be raised or lowered to suit the needs

of the surroundings. Turn the knob clockwise to increase

volume, counterclockwise to decrease volume.

MOUNTING

S-500 and S-500VC:

Cut an 8.50" diameter hole in ceiling tile. After

connections have been made to the speaker, attach

speaker to ceiling tile using the mounting hardware

provided.

Note: Where extra speaker support is needed, a S-550

Clarity Bridge should be used.

Clarity warrants its products to be free from defects in materials and workmanship under conditions of normal use and service for a

period of one year from the date of shipment. The obligation under this warranty shall be limited to the replacement, repair or refund of

any such defective device within the warranty period, provided that:

inspection by Clarity indicates the validity of the claim;

the defect is not the result of damage, misuse or negligence after the original shipment;

the product has not been in any way repaired by others and that factory sealed units are unopened (a service charge plus parts

and labor will be applied to units defaced or physically damaged);

freight charges for the return of products to Clarity are prepaid;

all units "out of warranty" are subject to a service charge. The service charge will cover minor repairs (major repairs will be

subject to additional charges for parts and labor).

This warranty is in lieu of and excludes all other warranties expressed or implied, and in no event shall Clarity be liable for any

anticipated profits, consequential damages, loss of time or other losses incurred by the buyer in connection with the purchase,

operation or use of the product.

This warranty specifically excludes damage incurred in shipment. In the event a product is received in damaged condition, the carrier

should be notified immediately. Claims for such damage should be filed with the carrier Involved in accordance with the F.O.B. point.

S-505: Remove the screw holding the mounting bracket

to the baffle and mount the bracket to the wall (typical

mounting height is 8 feet). After making the connections

to the speaker, place the baffle on the bracket and replace

the screw.

S-505VC: Remove the screw holding the mounting

bracket to the wall (typical mounting height is 8 feet).

After making the connections to the speaker, place the

baffle on the bracket and replace the screw.

TECHNICAL ASSISTANCE

When trouble is reported, verify the unit is turned on and

there are no broken connections leading to this unit.

Assistance in troubleshooting is available from the

factory. When calling, you should have a VOM available

and be calling from the job site. Call (540) 563-2000 and

ask for Technical Support or call (540) 767-1555 for

Clarity 24-hour Faxback System. Visit our website at

http://www/clarity-com.com.

CLARITY maintains service facilities in Roanoke, VA.

Should repairs be necessary, attach a tag to the unit

clearly stating company name, address, phone number,

contact person and the nature of the problem. Send the

unit to:

LIMITED WARRANTY

Clarity

Repair and Return Dept.

5614 Hollins Road

Roanoke, VA 24019-5056