Xerox Nuvera 200 힌트 및 팁 매뉴얼 - 페이지 16

{카테고리_이름} Xerox Nuvera 200에 대한 힌트 및 팁 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Nuvera 200 18 페이지. Production system
Xerox Nuvera 200에 대해서도 마찬가지입니다: 데이터시트 (2 페이지), 자발적 제품 접근성 템플릿 (12 페이지), 힌트 및 팁 매뉴얼 (18 페이지), 시작하기 매뉴얼 (30 페이지)

Xerox Nuvera 200 힌트 및 팁 매뉴얼
Release Issues
Xerox Nuvera

CQ#43933 Unable to Eject or Read CD From GUI or CD Button

Description
Operator cannot read the CD or cannot eject the CD tray from either the GUI or the CDROM
button. May occur after the first successful eject. The popup menu for the CDROM is not
displayed.
Workaround
Take the following steps:
1. Click on the "Print From File" Button and select "Browse"
2. Select CD in the "Look In" drop down.
3. Press the "Re-Display" button above the "Look In" area.
4. After a few seconds, the pop-up for the CDROM will appear.
5. A pop-up may also appear that states "No disk in drive, or path not valid". Click the OK
button to ignore this error.
6. Complete the CD operation you want to do in the pop-up window.
7. When finished, use the "Soft Eject in the GUI window" to eject the CD.

CQ#38117 Short Edge Feed 9x11 Stock

Description
9 x 11 stock cannot be loaded short edge first (SEF).
Workaround
Load an SEF-only stock such as Legal, run one or more sheets on that stock, then unload it and
put in 9x11 SEF.
3-6
Hints and Tips Guide