Xerox WorkCentre 6400 정보 매뉴얼 - 페이지 17

{카테고리_이름} Xerox WorkCentre 6400에 대한 정보 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox WorkCentre 6400 44 페이지. Color multifunction printer
Xerox WorkCentre 6400에 대해서도 마찬가지입니다: 특징 (1 페이지), 사양 (1 페이지), 빠른 사용 설명서 (17 페이지), 평가자 매뉴얼 (25 페이지), 설치 매뉴얼 (2 페이지), 구성 매뉴얼 (12 페이지), 평가자 매뉴얼 (24 페이지), 빠른 사용 설명서 (17 페이지), 빠른 사용 설명서 (16 페이지), 빠른 사용 설명서 (16 페이지), 매뉴얼 (32 페이지)

XEROX WorkCentre 6400 Information Assurance Disclosure Paper

Figure 2-6 IPv6 Network Protocol Stack

2.8. Logical Access

The supported network protocols are listed in Appendix D and are implemented to industry standard specifications

(i.e. they are compliant to the appropriate RFC) and are well-behaved protocols. There are no 'Xerox unique'

additions to these protocols.

2.8.1.1.

IPSec

The device supports IPSec tunnel mode. The print channel can be secured by establishing an IPSec association

between a client and the device. A shared secret is used to encrypt the traffic flowing through this tunnel. SSL must

be enabled in order to set up the shared secret.

When an IPSec tunnel is established between a client and the machine, the tunnel will also be active for

administration with SNMPv2 tools (HP Open View, etc.), providing security for SNMP SETs and GETS with an

otherwise insecure protocol. SNMP Traps may not be secure if either the client or the device has just been rebooted.

IP Filtering can be useful to prevent SNMP calls from non-IPSec clients.

Once an IPSec channel is established between two points, it stays open until one end reboots or goes into power

saver,. Only network clients and servers will have the ability to establish an IPSec tunnel with the machine. Thus

Ver. 1.00, May 2010

Page 17 of 44