Xerox 6100BD - Phaser Color Laser Printer 매뉴얼 - 페이지 32

{카테고리_이름} Xerox 6100BD - Phaser Color Laser Printer에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox 6100BD - Phaser Color Laser Printer 34 페이지. Disk overwrite installation and usage
Xerox 6100BD - Phaser Color Laser Printer에 대해서도 마찬가지입니다: 설치 매뉴얼 (34 페이지), 사양 (2 페이지), 사용자 설명서 (32 페이지), 브로셔 및 사양 (4 페이지), 사용자 설명서 (28 페이지), 설치 매뉴얼 (2 페이지), 보안 매뉴얼 (38 페이지), 설치 매뉴얼 (2 페이지), 릴리스 노트 (2 페이지), 시작하기 매뉴얼 (37 페이지), 매뉴얼 (34 페이지), 시작하기 매뉴얼 (34 페이지), 사용자 설명서 (32 페이지), 매뉴얼 (11 페이지), 설치 및 운영 매뉴얼 (8 페이지)

Xerox 6100BD - Phaser Color Laser Printer 매뉴얼

LCDS

28

User control of LCDS resources

¨ In this release, LCDS resources are not displayed until the
operator selects the Display button. Previously, selecting the
LCDS Resource Manager tab in Administration caused all
LCDS resources to display. This was time consuming,
especially for customers with tens of thousands of resources.

JDL staple support for DocuPrint 75/90

¨ The LCDS STAPLE command is now available for use with
the DP 75/90. The system does not require override settings
to be set in the Queue properties for stapling to work.
¨ Jobs can be offset and stapled simultaneously.
¨ The STAPLE command must be invoked before the start of
the job or on the first record of data in the job. Otherwise,
the DP 75/90 will ignore the STAPLE switch if a JDE/JDL
switch is made in the middle of the job.
¨ Jobs requiring N to 1 or Face Up and STAPLE=YES are
forced to print 1 to N and Face Down due to a restriction on
the stapling feature on the DP 75/90.
¨ Jobs that contain over 50 pages will not be stapled, and the
default setting is to fault the job. To change the setting to
print the job unfinished in the System Preferences Job Policy
tab:
¨ Select Print Job Unfinished under the Overlimit Finishing
section.
·
Select Check Set-Size Before Printing under the
Overlimit Finishing section.

Copy Sensitive CME Support

¨ Copy sensitive CMEs will be honored. The LCDS PDL allows
individual copies of a report to contain changes from the
original report by the use of copy sensitive form, RTEXT, and
CMEs. Copy sensitive CMEs allow certain parts of the report
to be modified on selected copies with new or replacement
static text or with the specification of font or ink changes
within the variable data.
¨ On the LPS printers, this was accomplished by performing
multiple passes over the data. Therefore, only offline tape
jobs could contain copy sensitive CMEs.
¨ On EPS printers, copy sensitive CMEs are supported with
spooling queues only. The job may originate from Online,
Tape, or the Socket gateway. However, if the job is
extremely large, the spool may become full. The spool is
DocuSP 3.6 to 3.7 Differences Document