Xerox 6100BD - Phaser Color Laser Printer 매뉴얼 - 페이지 22

{카테고리_이름} Xerox 6100BD - Phaser Color Laser Printer에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox 6100BD - Phaser Color Laser Printer 34 페이지. Disk overwrite installation and usage
Xerox 6100BD - Phaser Color Laser Printer에 대해서도 마찬가지입니다: 설치 매뉴얼 (34 페이지), 사양 (2 페이지), 사용자 설명서 (32 페이지), 브로셔 및 사양 (4 페이지), 사용자 설명서 (28 페이지), 설치 매뉴얼 (2 페이지), 보안 매뉴얼 (38 페이지), 설치 매뉴얼 (2 페이지), 릴리스 노트 (2 페이지), 시작하기 매뉴얼 (37 페이지), 매뉴얼 (34 페이지), 시작하기 매뉴얼 (34 페이지), 사용자 설명서 (32 페이지), 매뉴얼 (11 페이지), 설치 및 운영 매뉴얼 (8 페이지)

them on the screen because DocuSP currently does

not support Pantone processing for images. The colors

for text, graphics and images can potentially show a

difference that the customer may or may not like. By

disabling Pantone processing, the customer can

eliminate this problem. If Pantone processing is

disabled, the printer can process all text, images, and

graphics as CMYK representations and color uniformity

is maintained.

iGen3 updates

Native Path Improvements

For the DocuSP 4.2 product, the iGen3 CMYK source

profile has been improved to more closely resemble

SWOP rendition. This enables customers who are

used to SWOP workflows to more closely emulate

SWOP output.

SWOP+ Introduction

The SWOP Gamut does not fully utilize the iGen3

gamut. The new SWOP+ color profile sets hues within

the SWOP gamut to continue to simulate a SWOP

press. Colors outside the SWOP gamut extend to the

full iGen3 gamut. This provides increased contrast and

saturation, allows smooth transition to more saturated

colors while controlling blues and dark colors. In short,

SWOP+ allows customers to leverage the larger color

gamut available in iGen3.

Updated ICC Profile: CMYK Saturated Color

through the ICC path

This updated profile allows better contrast and results

for customers implementing color management. This

profile also provides for much better ICC color

managed workflows.

DocuSP 3.8 and 4.0 to 4.1 Differences Document