Xerox 6180DN - Phaser Color Laser Printer 매뉴얼 - 페이지 5

{카테고리_이름} Xerox 6180DN - Phaser Color Laser Printer에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox 6180DN - Phaser Color Laser Printer 34 페이지. 26-ppm monochrome/ 20-ppm color
Xerox 6180DN - Phaser Color Laser Printer에 대해서도 마찬가지입니다: 설치 매뉴얼 (34 페이지), 사양 시트 (2 페이지), 사용자 설명서 (32 페이지), 사용자 설명서 (28 페이지), 설치 매뉴얼 (2 페이지), 보안 매뉴얼 (38 페이지), 릴리스 노트 (2 페이지), 설치 매뉴얼 (2 페이지), 시작하기 매뉴얼 (37 페이지), 매뉴얼 (34 페이지), 시작하기 매뉴얼 (34 페이지), 사용자 설명서 (32 페이지), 설치 및 운영 매뉴얼 (8 페이지), 사양 (4 페이지), 매뉴얼 (28 페이지)

DocuSP 3.6 to 3.7 Differences Document

DocuSP 3.7x Overview

This document highlights the changes and new features included

in the DocuSP 3.70 through DocuSP 3.73 software releases.

Some features were added in updated releases to the DocuSP

3.6 software. These features are also included in this document.

¨ With DocuSP 3.7x, the System Administrator can adjust the

system security in the Security Setup window under the

Setup pull-down menu. Previously, a Xerox representative

performed this change. Default setup upon installation is a

security setting of High. Refer to the System Guide for

details on the security settings and what each means.

A change in the security setting requires a complete

Shutdown and reboot of the DocuSP controller. A security

setting of High disables connectivity to the DocuSP controller

using ftp and telnet. Some client applications, such as

DigiPath, may not be able to communicate with the DocuSP

controller with a security setting of High. Set the Security

setting to Medium to allow DigiPath and other client

applications to communicate correctly with the DocuSP

controller.

The scripts for enabling or disabling portions of the security

are still available. Refer to the System Guide for details on

the scripts.