Xerox 7700DN - Phaser Color Laser Printer 사용자 설명서 - 페이지 12
{카테고리_이름} Xerox 7700DN - Phaser Color Laser Printer에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox 7700DN - Phaser Color Laser Printer 35 페이지. Xerox phaser 7700: install guide
Xerox 7700DN - Phaser Color Laser Printer에 대해서도 마찬가지입니다: 설치 매뉴얼 (42 페이지)
페이지 인쇄
.
Printer Calibration
Spectrophotometer-Based Calibration
There are two methods provided for entering the calibration data values measured by a
spectrophotometer. The first method allows you to use PhaserMatch or PhaserCal software to
control and communicate with a spectrophotometer that is connected to your computer. The
second method allows you to manually import LAB measured data.
The spectrophotometers that can be controlled by PhaserMatch or PhaserCal software are:
■
GretagMacbeth Spectrolino/SpectroScan
GretagMacbeth Eye-One System
■
■
X-Rite DTP-41
■
X-Rite DTP-70
X-Rite PULSE
■
■
X-Rite Digital Swatchbook
■
SpectroStar SpectroCam
Note:
PhaserMatch and PhaserCal software do not support any densitometers for performing
a color calibration procedure.
PhaserMatch and PhaserCal software walks you through a series of steps that generate and
download the calibration data to a printer.
To perform a spectrophotometer-based calibration:
1.
Launch the PhaserMatch or PhaserCal application.
2.
Click the Calibrate Printer button in the main screen.
3.
Click the Spectrophotometer-Based Calibration button in the main Calibrate Printer
screen
4.
Select a device from the list of supported spectrophotometers or select Manually Enter
Data.
5.
Select a printer, print quality, and paper type you use to do the calibration procedure.
PhaserMatch and PhaserCal 4.0 User Guide
2-1