Xerox DocuColor 45054549 사용자 부록 - 페이지 6

{카테고리_이름} Xerox DocuColor 45054549에 대한 사용자 부록을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox DocuColor 45054549 30 페이지. For docucolor 240/250

Updating system software through WebTools

You can also check for system software updates from a secure site on the Internet. Updates to

user software may also be available.

O CHECK FOR SOFTWARE UPDATES

1 Start WebTools.

2 Type the Administrator password and click OK.

3 Click Software Updates.

If Software Updates does not appear as one of the WebTools, click Conﬁgure and enable it.

4 If an update is available, click the update.

The update is downloaded to the Fiery EXP250.

5 For information about installing the update, click the ReadMe ﬁle provided with the update.

Installing the EXP250 SP1 System Software Update from the CD

Before installing this system update, print the Fiery EXP250 Conﬁguration page.

1 Make sure the Fiery EXP250 is Idle and temporarily remove any dongle attached to the

Fiery EXP250.

2 Insert the EXP250 SP1 System Software Update CD into a computer that can print to the

Fiery EXP250 and has Command WorkStation installed.

If Command WorkStation is installed directly on the Fiery EXP250, you can insert the CD in

the DVD drive of the Fiery EXP250.

You can also download ﬁles from a Windows or a Mac OS computer using

OTE

Downloader or WebDownloader. For more information about downloading ﬁles using these

utilities, see Utilities.

3 Start Command WorkStation and connect to the Fiery EXP250.

If you experience any problems, make sure Setup is conﬁgured properly.

4 Choose File>Import>Job from the Command WorkStation menu.

5 Navigate to the "System SW Update.ps" directory on the EXP250 SP1 System Software

Update CD, select the update ﬁle, and click Add.

6 Choose the Print or Direct connection from the Logical Printer menu.

7 Click Import and wait for the Fiery EXP250 to reach idle after downloading the update.

You must wait at least 60 seconds after the patch ﬁle is imported before rebooting the system.

This will ensure the patch ﬁle is completely processed.

8 Remove the EXP250 SP1 System Software Update CD from the Fiery EXP250 or remote

computer.

Page