Xerox DocuPrint 115 운영 매뉴얼 - 페이지 30
{카테고리_이름} Xerox DocuPrint 115에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox DocuPrint 115 34 페이지. Tape client job submission guide enterprise printing system
Xerox DocuPrint 115에 대해서도 마찬가지입니다: 운영 매뉴얼 (38 페이지), 사양 (2 페이지), 참조 매뉴얼 (2 페이지), 계획 매뉴얼 (20 페이지), 빠른 참조 (2 페이지), 보충 설명서 (48 페이지)
페이지 인쇄
Changing print modes
Changing from NPS/IPS print mode to EPS print mode
3- 4
Use the following procedure to change operating modes of the
printing system from NPS/IPS mode to EPS mode.
NOTE: You must be logged in the system as either an Operator or
Administrator to switch between NPS/IPS and EPS modes.
1. Stop printing of any pending jobs, using one of the following
procedures:
•
In command line mode: On the command line, enter: stop
printing.
•
In GUI mode: Click the red [Stop Printing] button in the
upper-right corner of the main window.
2. View the document list and wait for any document currently
pending or being printed to complete. To view the list, do one
of the following:
•
In command line mode: Enter: list documents.
•
In GUI mode: Click the [Job Manager] icon to display the
Job Manager window.
3. From the Workspace background menu, select [Start EPS
Printing].
4. On the confirmation window that appears, click [Confirm].
Within a few minutes, the printing system reboots and starts in
EPS print mode, displaying the graphical user interface.
Refer to the DocuPrint 100/115/135/155/180 EPS customer
documentation set for information and procedures for operating in
EPS print mode.
NPS/IPS Extension Operations Guide