Xerox DocuSP 3.6 시작하기 - 페이지 19

{카테고리_이름} Xerox DocuSP 3.6에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox DocuSP 3.6 28 페이지. Docusp 3.6 to 3.7 differences
Xerox DocuSP 3.6에 대해서도 마찬가지입니다: 매뉴얼 (34 페이지)

페이지 인쇄
Xerox DocuSP 3.6 시작하기

Security

DocuJob Converter

VIPP Interpreter

DigiPath

Clients

XEROX DOCUMENT SERVICES PLATFORM SERIES
GETTING STARTED
The following notes and caveats are specific to Security issues
on the DocuSP controller.
-
The IPP Gateway loads an unsecured version of Java. If
security is an issue, do not use the IPP Gateway.
–
The DocuJob Converter software must be at least version
2.1.04. This version corrects a timing problem that resulted
in jobs being lost at the controller.
–
Version 2.2 of the DocuJob Converter software, which runs
under Solaris 2.6 on a Sun Ultra 60 platform, is available.
–
VIPP 4.0 demo mode is included with a DocuSP 3.6.xx new
installation. In order to fully use VIPP 4.0, a production kit
and a license will need to be obtained from your Xerox
representative. Existing DocuSP customers with a VIPP
license should be able to upgrade to DocuSP 3.6.xx and
VIPP 4.0. In order to use VIPP 4.0, the DocuSP must be at
version 3.1 or higher.
–
Please reference the VIPP documentation for additional
information pertaining to VIPP.
–
Please reference the DigiPath 3.0 Customer Software
Release Supplement for additional information pertaining to
DigiPath.
–
Please reference the Xerox Production Print Services
version 3.6.xx documentation for more information.
–
Macintosh clients using the AppleTalk Gateway submit jobs
very slowly or hang during submission, requiring a reboot of
the DocuSP controller.
DOCUSP 3.6.xx
2-9