Xerox DocuSP 3.x 시작하기 매뉴얼 - 페이지 11

{카테고리_이름} Xerox DocuSP 3.x에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox DocuSP 3.x 27 페이지. Document services platform series

XEROX DOCUMENT SERVICES PLATFORM SERIES

GETTING READY FOR THE DOCUSP INSTALLATION

instance the following data element, subnetwork mask, must

also be provided.

Subnet mask: The subnet mask is a decimal or hexadecimal

group of four fields, each separated by a decimal point, that

indicates how much of the IP Address is used with the Network

number to create subnets. The following is an example of a

subnet mask in its decimal and hexadecimal form.

255.255.0.0 = 0xff.0xff.0x0.0x0

The subnet mask is derived by the network administrator

according to how many subnets are needed. The subnet mask is

the same for all hosts that exist on a given network. Your

customer's network administrator can provide this information.

Domain name for Domain Name Service: Enter the name of

the Domain Name Service server.

Server IP Address(es): Enter one or more IP addresses for the

Domain Name Service server. The IP address is a unique 4

byte, 32 bit numeric value. This information, along with the DNS

name, will be entered into the resolv.conf file during installation.

Geographic region: Enter your customer's geographical region

The selections available are Africa, Western Asia, Eastern Asia,

Australia/New Zealand, Canada, Europe, Central America,

South America, United States, Other (offset from GMT), Other

(specify rules file).

Time zone: Enter your customer's time zone. The selections

available are: Eastern, Central, Mountain, Pacific, Yukon,

East—Indiana, Arizona, Michigan, Samoa, Aleutian, Hawaii,

none of these (return to regional menu).

Default router lP address: The default router IP address is a

unique 4 byte, 32 bit numeric value, for example,13.252.12.198,

that identifies the machine that is acting as the main router. The

router maintains tables of addresses of many networks in order

to forward data packets between these networks. During install,

the service representative creates a default router file on the

controller, if one does not already exist, and this number is

added to a line in the new file. Your customer's network

administrator should provide this number.

NOTE: If another machine is not identified as the default router

the controller will automatically take over the main router function

This may noticeably slow down processing on the network.

DOCUSP 3.x