Xerox FreeFlow 보안 매뉴얼 - 페이지 32

{카테고리_이름} Xerox FreeFlow에 대한 보안 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox FreeFlow 38 페이지. For color 560/570 printer
Xerox FreeFlow에 대해서도 마찬가지입니다: 설치 매뉴얼 (34 페이지), 브로셔 (2 페이지), 릴리스 노트 (23 페이지), 설치 매뉴얼 (2 페이지), 릴리스 노트 (33 페이지), 중요 설치 정보 (2 페이지), 사용자 설명서 (50 페이지), 매뉴얼 (18 페이지), 빠른 연결 매뉴얼 (2 페이지), 항공사 절차 매뉴얼 (28 페이지)

Xerox FreeFlow 보안 매뉴얼
Network
Protocol
HTTP
Tomcat web
server
IPP
Sun RPC
SNMP
WINS
Socket (Raw
TCP/IP)
Printing
LPD (LP/LPR)
SSH
28
Used when connecting to the server via the HTTP gateway.
Connections can also be filtered using the IP Filter feature
under Setup -> IP Filter.
NOTE: When SSL is disabled (off) other web-based logins
provided by the Xerox FreeFlow Print Server may not be
secure. Use the HTTPs qualifier to guarantee a secure
interaction.
Required for the functionality of the Xerox FreeFlow Print
Server Internet Services gateway and the Xerox Remote
Services application.
Required for job submissions from the FreeFlow® Print
Manager and/or a Digipath (FreeFlow 2.0+) client. The IPP
gateway can be enabled/disabled under Setup -> Gateways ->
IPP tab. Connections can also be filtered using the IP Filter
feature under Setup -> IP Filter.
Used by many different clients, including DigiPath/FreeFlow
and Xerox FreeFlow Print Server Remote WorkFlow (DRW),
and network services such as NIS+. Typically used to establish
a connection to the server, which then redirects the connection
to another open port using OS level port management. This
service is shutdown when Xerox FreeFlow Print Server security
is set to high. Connections can also be filtered using the IP
Filter feature under Setup -> Security Profiles -> <Any Profile> -
> RPC tab
Used for SNMP message exchange and traps. The SNMP
gateway can be enabled/disabled under Setup -> Gateways ->
SNMP.
Required when in an environment where connection to a WINS
server is necessary. WINS service can be enabled/disabled
under Setup -> Network Configuration -> WINS tab.
Required if jobs will be submitted via the socket gateway. The
socket gateway can be enabled/disabled under Setup ->
Gateways -> Socket. Connections can also be filtered using the
IP Filter feature under Setup -> IP Filter.
Required for job submissions via the LP/LPR gateway (LP/LPR
client, Xerox FreeFlow Print Server Print Service (Reprint),
etc.). The port assigned to the LPD can be changed and/or the
gateway can be enabled/disabled under Setup -> Gateways ->
LPD.
Access the server via a secure shell (SSH, SFTP, etc.).
Required
Security Guide