Xerox FREEFLOW 701P46740 보안 매뉴얼 - 페이지 30

{카테고리_이름} Xerox FREEFLOW 701P46740에 대한 보안 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox FREEFLOW 701P46740 38 페이지. Print server

Xerox FREEFLOW 701P46740 보안 매뉴얼
Using an Existing Signed Certificate from a Certificate Authority
26
NOTE: During steps 2-5, the user may go back and correct any
mistakes made in previous steps.
Click on the 'Enable SSL/TLS' checkbox at the top of the SSL/
TLS window.
Select a SSL/TLS mode of operation:
Normal (Encrypted and Unencrypted Access)
Secure (Encrypted Access Only)
Select encryption strength:
Normal (DES-MD5-56-bit)
Normal (DES-MD5-40-bit)
Normal (DES-MD5-128-bit)
Normal (3DES-MD5-128bit)
High (RC4-MD5-128-bit)
High (3DES-MD5-128-bit)
If SSL/TLS is not already enabled
Click 'Add Certificate'
Step 1 - Select "Signed Certificate from a Certificate Authority"
Step 2 - Select and enter either the server
Domain Name
IP Address
Other
Step 3 - Enter the requested information:
Organization (required)
Organizational Unit (optional)
E-mail (optional)
Locality (optional)
State/Province (optional)
Country (required)
Step 4 - Browse to the location of the signed certificate (.pem
file).
Step 5 - Verify information entered in previous steps.
Step 6 - A message will appear indicating that the certificate
has been installed.
NOTE: During steps 2-5, the user may go back and correct any
mistakes made in previous steps.
Security Guide