Xerox iGen3 계획 매뉴얼 - 페이지 13
{카테고리_이름} Xerox iGen3에 대한 계획 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox iGen3 38 페이지. Solutions planning guide
Xerox iGen3에 대해서도 마찬가지입니다: 브로셔 (8 페이지)
페이지 인쇄C.P. Bourg Document Finisher (BDFx)
Dimensions
Width x Depth x Height
Shipping Dimensions
Width x Depth x Height
Weight
Shipping Weight
Operator Clearance
Service Clearance
Electrical Requirements
Bourg Document Finisher
104.3"
*
x 24" x 71"
2650 x 739 x 1803 mm
*
- Including Conveyor
77" x 30" x 73"
1950 x 750 x 1850 mm
992 lbs (450 kg)
1235 lbs (560 kg)
Minimum 24" (609.6mm) in
front of the device
Minimum 35" on all sides of
the device
Dimensions
Width x Depth x Height
Shipping Dimensions
Width x Depth x Height
Weight
Shipping Weight
Operator Clearance
Service Clearance
Nema # for all the devices listed below: 5R-15
Device
North America
BDF-X Power
120 VAC (+/- 10%), 60 Hz, 10A
BCF-X Power
120 VAC (+/- 10%), 60 Hz, 5A
SQEDG Power
120 VAC (+/- 10%), 60 Hz, 5A
Device
North America
BSR
110VAC (+/- 10%), 60 Hz, 4A
Note: For power cord locations on each device please refer to the
space diagrams in the
Square Edge Module
(optional)
40.1" x 24.25" x 49"
1020 x 616 x 1242 mm
47.2" x 35.8" x 63"
1200 x 910 x 1600 mm
198 lbs (90 kg)
507 lbs (230 kg)
Minimum 24" (609.6mm) in
front of the device
Minimum 35" on all sides of
the device
Bourg Sheet Rotator (optional,
mandatory with iGen3)
31.5" x 28.5" x 38.5"
805 mm x 720 mm x 980 mm
34.6" x 32.7" x 49.2"
880 mm x 830 mm x 1250 mm
298 lbs (135 kg)
353 lbs (160 kg)
Minimum 24" (609.6mm) in front of the
device
Minimum 30" (763 mm) on all sides of
the device
Europe
230 VAC (+/- 10%), 50 Hz, 7A
230 VAC (+/- 10%), 50 Hz, 3A
230 VAC (+/- 10%), 50 Hz, 3A
Europe
220VAC, (+/- 10%), 50 Hz, 2A
Space Requirements
1-5
Bourg Cover Feeder
(optional,)
26.75"
*
x 27" x 52"
680 x 687 x 1242 mm
*
- 19.7" (500 mm) actual
floor space.
51" x 31.5" x 59"
1300 x 800 x 1500 mm
291 lbs (132 kg)
264 lbs (120 kg)
Minimum 24" (609.6mm) in
front of the device
Minimum 35" on all sides of
the device
section.