Xerox iGen3 계획 매뉴얼 - 페이지 18
{카테고리_이름} Xerox iGen3에 대한 계획 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox iGen3 38 페이지. Solutions planning guide
Xerox iGen3에 대해서도 마찬가지입니다: 브로셔 (8 페이지)
C.P. Bourg Document Finisher (BDFx)
Limitations
System Dependencies and Prerequisites
Configuration Guide
Printer Configurations
IOT
INTERPOSER
•
The BDFx can only be guaranteed to work to its maximum
book thickness when feeding (8.5 x 11 / A4) paper if the
paperweight is 90 gsm or less. (Long grain paper with a
weight above 90 gsm should be tested with the customer
paper and application before selling the BDFx.)
•
Use of short grain paper is highly recommended for 11 x 17"
/ A3 sized paper.
Listed below are the dependencies and prerequisites for
installing the BDFx, BCFx and SQEDG module.
•
The DT61xx must be equipped with a Bypass Transport to
enable In-line Finishing.
The Configuration Guide contains diagrams over the various
Finishing Solutions that are currently supported.
Finisher Configurations
BYPASS
BDFx
TRANSPORT
DS5000
DS5000
DS5000
DS5000
2-2
BCFx
BDFx
BCFx
BDFx
DS5000
BCFx
BCFx
BDFx
SQEDG
DS5000
BDFx
DS5000
DS5000
BCFx
BDFx
SQEDG
BDFx
SQEDG
BDFx
DS5000
BCFx
BDFx