Xerox Phaser 6100DN 보안 매뉴얼 - 페이지 31

{카테고리_이름} Xerox Phaser 6100DN에 대한 보안 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Phaser 6100DN 38 페이지. Disk overwrite installation and usage
Xerox Phaser 6100DN에 대해서도 마찬가지입니다: 설치 매뉴얼 (34 페이지), 사양 (2 페이지), 사용자 설명서 (32 페이지), 브로셔 및 사양 (4 페이지), 사용자 설명서 (28 페이지), 설치 매뉴얼 (2 페이지), 설치 매뉴얼 (2 페이지), 릴리스 노트 (2 페이지), 시작하기 매뉴얼 (37 페이지), 매뉴얼 (34 페이지), 매뉴얼 (34 페이지), 시작하기 매뉴얼 (34 페이지), 사용자 설명서 (32 페이지), 설치 및 운영 매뉴얼 (8 페이지)

Digital Certificates

Network

Protocol

Samba (SMB)

XSun

Security Guide

SSL/TLS cannot be enabled unless a digital certificate has been

installed on the system, using the Add Certificate button. Installing

a digital certificate can only be done by someone with

administrator privileges.

The administrator selects SSL/TLS from the [Setup] Menu and

clicks on the [Add Certificate] button. This invokes the Add

Certificate wizard. There are two options regarding digital

certificates. One option is "Self-signed certificate". This is selected

when no third party Certificate Authority is being used.

Another option is "Signed Certificate from a Certificate Authority".

In this case, the administrator needs to supply the fully qualified

domain name, IP address, organization and country of the

Certificate Authority.

If the choice is to use a Certificate Authority, all Certificate

information needs to be held in a file and sent to the Certificate

Authority. The Authority returns a valid certificate that must be

installed on the system.

NOTE: A self-signed certificate is not as secure as a certificate

signed by a Certificate Authority. A self-signed certificate is the

most convenient way to begin using SSL/TLS and does not

require the use of a server functioning as a Certificate Authority or

a third party Certificate Authority.

Once the Digital Certificate has been installed, the Enable SSL/

TLS selection becomes available among the [Setup] options. At

that time the administrator can select the mode of operation,

Normal or Secure, from a drop-down menu.

This section addresses Network Protocol, name service changes

and the changes that occur when security is invoked.

The table below addresses the list of Network Protocols that are

used by the Xerox FreeFlow Print Server software or Xerox client

operations.

Table 2-7

Network Protocols

Network sharing protocol required for Hot Folders and SMB

filing (Nuvera only).

Required for functionality of Xerox FreeFlow Print Server

diagnostics software.

Required