Xerox Phaser 6100DN 매뉴얼 - 페이지 6

{카테고리_이름} Xerox Phaser 6100DN에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Phaser 6100DN 34 페이지. Disk overwrite installation and usage
Xerox Phaser 6100DN에 대해서도 마찬가지입니다: 설치 매뉴얼 (34 페이지), 사양 (2 페이지), 사용자 설명서 (32 페이지), 브로셔 및 사양 (4 페이지), 사용자 설명서 (28 페이지), 설치 매뉴얼 (2 페이지), 보안 매뉴얼 (38 페이지), 설치 매뉴얼 (2 페이지), 릴리스 노트 (2 페이지), 시작하기 매뉴얼 (37 페이지), 매뉴얼 (34 페이지), 시작하기 매뉴얼 (34 페이지), 사용자 설명서 (32 페이지), 설치 및 운영 매뉴얼 (8 페이지)

¨ The HTTP gateway is loaded and running by default. The

HTTP gateway allows users with Internet access to the

controller to submit jobs by opening a standard web browser

and entering the IP address of the DocuSP controller.

Setting the security to high does not restrict this client.

Disabling the license does not prevent this service from

running. Customers who do not wish to allow this kind of

access should remove the XRXhttp package by following the

steps below.

1. Open a terminal window and login as root user.

2. Type pkgrm XRXhttp and press <Enter>.

3. Answer y to the prompts.

Shutdown and reboot the DocuSP controller.

NOTE: Once a script is run, the setting is permanent until the

disabling script is run or the Security setting in the DocuSP

UI is toggled from Medium to High. For example, the

security is set to High, but the enable-ftp script is run. FTP is

now enabled until the disable-ftp script is run, or until the

security setting is toggled to medium and then back to high.

The DocuSP controller needs to be rebooted after the toggle

from high to medium to high is complete.

DocuSP 3.6 to 3.7 Differences Document