Xerox Phaser 7300DN 문제 해결 매뉴얼 - 페이지 9

{카테고리_이름} Xerox Phaser 7300DN에 대한 문제 해결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Phaser 7300DN 40 페이지. Quick reference guide
Xerox Phaser 7300DN에 대해서도 마찬가지입니다: 특징 (1 페이지), 브로셔 및 사양 (4 페이지), 사용자 설명서 (50 페이지), 기능 설명서 (40 페이지), 지원 매뉴얼 (28 페이지), 종이 매뉴얼 (34 페이지), 설정 매뉴얼 (18 페이지), 설정 및 빠른 참조 매뉴얼 (45 페이지)

페이지 인쇄

Overview

Color calibration procedures adjust the printer for optimal color output. Color settings may need adjustment upon initial

printer set-up or when toners and imaging units are replaced. There are two procedures:

Balance

Colors. If the overall image appears either too light or dark, use the

adjustment of the primary colors (cyan, magenta and yellow) is needed, continue with the

Lighten/Darken Colors

The Lighten/Darken Colors procedure uniformly increases or decreases each primary color (cyan, magenta and yellow

and black) to produce a lighter or darker image.

Procedure:

Select

Lighten/Darken Colors

to evaluate the lightness/darkness of the image. The printer's current Lighten/Darken Value is listed on the page.

Use the Up Arrow and Down Arrow keys to change the value from -5 (lightest) to 5 (darkest) and press OK.

The

Color Reference Page

achieve the desired result.

To finish the procedure select one of the following:

Accept Changes and

Discard Changes and

Balance Colors

The Balance Colors procedure sets the balance between the primary colors (cyan, magenta and yellow) to simulate black.

Each of the color balance pages (like the page illustrated on the right) contains a

large cluster of circles, numbered from 0 to 54, that vary in hue.

The center circle (0) should match or appear to blend with some portion of its

surrounding hexagonal gray ring. The circle can show a color shift if one or more

of the colors are printing with a different density. For example, if cyan is printing

lighter than normal, the circle will appear redder.

Procedure:

Select

Balance Colors

Follow the steps on the

Page 1 of 1

from the

Calibrate Colors Menu

automatically prints using the new lighten/darken value. Repeat this procedure until you

Continue: Saves the new value and returns to the

Exit: Saves the new value and returns to the

Exit: Returns to the

Main Menu

from the

Calibrate Colors

Light Color Balance

page until the desired adjustment is achieved.

Dark Color Balance

page until the desired adjustment is achieved.

PHASER

7300 COLOR PRINTER

and press OK. Use the printed

Main

without saving.

Menu. The

Light Color Balance

Color Calibration Tutorial

Lighten/Darken Colors

procedure. If a finer

Balance Colors

Color Reference Page

Calibrate Colors

Menu.

page prints automatically.

and

procedure.

Phaser 7300 Color Printer

Light Color Balance Adjustment