Xerox Phaser 7300DN 사용자 설명서 - 페이지 19

{카테고리_이름} Xerox Phaser 7300DN에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Phaser 7300DN 50 페이지. Quick reference guide
Xerox Phaser 7300DN에 대해서도 마찬가지입니다: 문제 해결 매뉴얼 (40 페이지), 특징 (1 페이지), 브로셔 및 사양 (4 페이지), 기능 설명서 (40 페이지), 지원 매뉴얼 (28 페이지), 종이 매뉴얼 (34 페이지), 설정 매뉴얼 (18 페이지), 설정 및 빠른 참조 매뉴얼 (45 페이지)

Click Next to accept the printer's default name or enter an alternate name, and then click Save

Changes before clicking Next.

The information dialog box displays the files to be copied to your system. Click Next to install the

files and Finish to complete the installation.

Other methods of installation

The Xerox installer for Windows automatically installs Xerox TCP/IP Port Monitor for those

installations using the PCL 5c driver. The Xerox TCP/IP Port Monitor can be used to add or remove

TCP/IP ports.

Adding a port using Xerox TCP/IP Port Monitor

To add a TCP/IP port, open the Printer Properties dialog box for the printer you would like to

attach the new TCP/IP port.

Click Start, scroll to Settings, and click Printers.

Click your right-mouse button on the printer to which you want to attach the new TCP/IP

port, and select Properties.

Select the Details tab, and click the Add Port button.

In the Add Port dialog box, select Other.

From the list of available printer port monitors, select the Xerox TCP/IP Port, and then click the

OK button.

At this point, you enter the Xerox TCP/IP Printer Port Wizard. The wizard guides you step-by-

step through the following procedures:

Choosing a name for the new port.

Identifying a printer by its DNS Name or IP Address.

(Alternatively) Identifying a printer using the automatic Printer Discovery feature. Click

Next to proceed with the port installation.

The wizard verifies the port name and printer address, and automatically configures the remaining

port settings for you. Any errors detected in printer identification displays a dialog box requesting

Additional Information.

In the Add Xerox TCP/IP Port window:

Under Enter a Port Name, enter a unique name for the port being added.

Under Enter a printer name or IP address, enter the printer's host name or IP Address.

Click Next.

Note

To locate Xerox printers on your local area network, select Auto Printer Discovery, and

then click Refresh. The Xerox TCP/IP Port Monitor searches the network for Xerox printers

and displays them in a list. Select your desired printer from the list and click OK.

Phaser® 7300 Color Printer

Windows 95/98/Me Network