Xerox Phaser 7300DN 사용자 설명서 - 페이지 46
{카테고리_이름} Xerox Phaser 7300DN에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Phaser 7300DN 50 페이지. Quick reference guide
Xerox Phaser 7300DN에 대해서도 마찬가지입니다: 문제 해결 매뉴얼 (40 페이지), 특징 (1 페이지), 브로셔 및 사양 (4 페이지), 기능 설명서 (40 페이지), 지원 매뉴얼 (28 페이지), 종이 매뉴얼 (34 페이지), 설정 매뉴얼 (18 페이지), 설정 및 빠른 참조 매뉴얼 (45 페이지)
UNIX/Linux Network
This section provides installation and troubleshooting steps for UNIX and Linux:
Overview — see page 41.
Quick install steps — see page 41.
Additional resources — see page 42.
Overview
Your Phaser printer supports connection to a variety of UNIX platforms. Below is a list of the currently
supported versions:
Solaris
IBM AIX
Hewlett-Packard HP-UX
DEC UNIX
True UNIX 64 (Compaq)
Linux (i386)
Linux (PPC)
SGI
The procedures contained in this document enable you to connect your printer using any of the
supported versions of UNIX or Linux listed above.
Quick install steps
1.
Print the Configuration Pages and retain them for reference. For information on printing
Configuration Pages, refer to the Front Panel section of the Features Guide on the Interactive
Documentation CD-ROM.
2.
Check the Configuration Pages and verify that both TCP/IP protocol and the proper connector are
enabled.
3.
Go to the section IP Address and perform one of the procedures there, depending on the manner in
which you want to set your printer's IP address.
4.
Solaris: Refer to the CentreWare Services for Unix Systems User Guide (English only) included
on the Printer Installer and Utilities CD-ROM for CentreWare installation and detailed printer
setup instructions.
Other UNIX OS: Load printer drivers and configure the printer for one of the Print Models.
These drivers are available on the Printer Installer and Utilities CD-ROM or from the Xerox
web site at www.xerox.com/officeprinting/support.
Copyright © 2002 Xerox Corporation. All Rights Reserved.
Phaser® 7300 Color Printer
41