Xerox Phaser 7300DN 종이 매뉴얼 - 페이지 24
{카테고리_이름} Xerox Phaser 7300DN에 대한 종이 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Phaser 7300DN 34 페이지. Quick reference guide
Xerox Phaser 7300DN에 대해서도 마찬가지입니다: 문제 해결 매뉴얼 (40 페이지), 특징 (1 페이지), 브로셔 및 사양 (4 페이지), 사용자 설명서 (50 페이지), 기능 설명서 (40 페이지), 지원 매뉴얼 (28 페이지), 설정 매뉴얼 (18 페이지), 설정 및 빠른 참조 매뉴얼 (45 페이지)
페이지 인쇄
Transparencies
Transparencies can be printed from Tray 1 or the Multi-Purpose Tray. Handle transparencies by the
edges and with both hands to avoid fingerprints and creases, which can cause poor print quality.
Videos are available with instructions for loading transparencies. Videos are located on the
Interactive Documentation CD-ROM and on the Xerox web site at:
www.xerox.com/officeprinting/7300support
Xerox Phaser 35-Series Transparencies
Xerox recommends that you use Phaser 35-Series Transparencies, which have been specifically
developed for use with this type of printer fuser.
Xerox Phaser 35-Series Transparency Film
Item
Size
Premium
A/Letter (U. S.)
8.5 x 11 in.
Premium
A4 (Metric Letter)
210 x 297 mm
Standard
A/Letter (U. S.)
8.5 x 11 in.
Standard
A4 (Metric Letter)
210 x 297 mm
To order supplies and accessories, contact your local reseller or visit the Xerox web site at:
www.xerox.com/officeprinting/7300supplies
Using non-Phaser 35-Series transparency film
The printer features a unique oil-less fuser. Phaser 35-Series Premium Transparency film is designed
specifically to work with the printer's fuser. If you want to use non-Phaser 35-Series transparency film,
you must use a film that meets the following specifications:
Compatible with oil-less fuser systems
I
Fusing temperature: 165 degrees C
I
Transparency film that does not meet these specifications can produce poor image quality, produce a
jam in the printer, wrap around the fuser rollers and even melt on the fuser rollers. Some non-Phaser
35-Series transparencies have paper tape on the edge that can separate in the heat of the fuser, leading to
damage. Using non-Phaser 35-Series transparencies may damage the fuser. Damage caused by using
non-Phaser 35-Series transparencies might not be covered under the warranty, service agreement, or
Total Satisfaction Guarantee.
Note
Xerox and Xerox Phaser transparency films developed for other Xerox printers and copiers
are not meant to be used with this printer. Using non-Phaser 35-Series transparencies may
damage the fuser and might not be covered under the warranty.
Phaser® 7300 Color Printer
Description
Part Number
50 sheets
016-1896-00
50 sheets
016-1897-00
50 sheets
016-1894-00
50 sheets
016-1895-00
Specialty Printing
19