Xerox Phaser 7750DXF 매뉴얼 - 페이지 4
{카테고리_이름} Xerox Phaser 7750DXF에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Phaser 7750DXF 5 페이지. Xerox phaser 7750: supplementary guide
Xerox Phaser 7750DXF에 대해서도 마찬가지입니다: 사양 (4 페이지), 사용자 설명서 (35 페이지), 소유자 매뉴얼 (4 페이지), 사양 (2 페이지), 보충 설명서 (5 페이지), 보충 설명서 (2 페이지)
페이지 인쇄
Push Tray 2 completely into the printer.
Selecting Custom Size Options at the Front Panel
1.
At the printer's front panel, do one of the following:
■
Press the OK button if both the paper type and size selected are correct. Go to Step 7.
Change
■
Select
if the paper type or size selected is not correct, then press the OK
button. Go to step 2.
2.
Select the paper type, then press the OK button.
3.
Select Custom, then press the OK button. You are prompted to enter the custom width
and custom height.
Note
When the front panel prompts you to set
(H), verify that you are selecting the correct width and height values for the paper size
and orientation (long-edge feed or short-edge feed). See the following illustration to
determine how to select the correct width and height.
H
Long-Edge Feed
4.
Custom Width
Select
press the OK button.
Custom Width (W)
W
7750-168
(W), press the Up or Down Arrow button to select a value, then
Phaser® 7750 Color Laser Printer
2-72
Custom Size Paper
7750-014
Custom Height
and
W
H
7750-169
Short-Edge Feed