Xerox Synergix 8830 운영자 매뉴얼 - 페이지 23
{카테고리_이름} Xerox Synergix 8830에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Synergix 8830 48 페이지. Windows nt 4.0 postscript print driver user guide
Xerox Synergix 8830에 대해서도 마찬가지입니다: 설정 매뉴얼 (20 페이지), 릴리스 노트 (23 페이지), 보충 설명서 (26 페이지), 소프트웨어 설명서 (30 페이지)
페이지 인쇄
OFF-LINE MENUS
Printer Menu
The printer has two off-line menus that customize the printer to meet your
particular application.
The Printer Menu allows you to customize the printer to meet your special
requirements. The Controller Menu (available only on Printers with a
Controller installed) allows you to configure the controller to meet your
specific requirements.
The Printer Menu contains six submenus, with one or more features per
submenu, that allows you to control the operation of the printer:
1. Audible Indicators: This submenu has two features which activate an
audible beeper for system events and keypad
actuation's.
2. Timers:
This submenu sets the time intervals for the Power
Saver and Rest mode.
3. Printer Adjustments: The print density can be increased or
decreased.
4. Finisher Settings:
This submenu enables you to specify the finisher
configuration type.
5. Diagnostics
One of the three features allows you to run a test
print in the off-line mode. Another feature displays a
record of printer faults. A third feature is for use by
the Service Representative and is password
protected.
6. Billing Meters
These two meters provide records of the length and
area of prints produced.
XES Synergix 8825/8830 Printer Operator Manual
19