Xerox Synergix 8830 소프트웨어 설명서 - 페이지 16
{카테고리_이름} Xerox Synergix 8830에 대한 소프트웨어 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Synergix 8830 30 페이지. Windows nt 4.0 postscript print driver user guide
Xerox Synergix 8830에 대해서도 마찬가지입니다: 운영자 매뉴얼 (48 페이지), 설정 매뉴얼 (20 페이지), 릴리스 노트 (23 페이지), 보충 설명서 (26 페이지)
페이지 인쇄
XES Synergix 8825/8830/8850/8855 Windows NT 4.0 PostScript Print Driver User Guide
Document Properties Dialog (Advanced Tab Parameters)
Orientation
This parameter displays the currently-selected orientation of the printed
document on the page. To change the printed document orientation, left
mouse click on Orientation and make a selection from the available radio
buttons in the bottom dialog box. Portrait prints the document vertically
on the page. Landscape prints the document horizontally on the page.
The rotated selection prints the document rotated as shown on the
dialog. The default orientation is Portrait.
Paper Source
This parameter displays the currently-selected paper source. To change
the paper source, left mouse click on Paper Source and make a selection
from the available list in the bottom dialog box. The following paper
source options are supported:
•
Automatically Select
•
Manual Feed
•
Roll 1
•
Roll 2
•
Roll 3
•
Roll 4
The default paper source is Automatically Select.
Media
This parameter displays the currently-selected media. To change the
media, left mouse click on Media and make a selection from the available
list in the bottom dialog box. The following media types are supported:
•
Any
•
Bond
•
Vellum
•
Film
The default media type is Bond.
Note: To tell your printer how to handle possible mismatches between
the media type you select here and the media types actually installed in
the printer, see the information presented in this User Guide under the
Media Mismatch Mode feature.
12