Xerox 6180N - Phaser Color Laser Printer 매뉴얼 - 페이지 22

{카테고리_이름} Xerox 6180N - Phaser Color Laser Printer에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox 6180N - Phaser Color Laser Printer 34 페이지. Color laser printer
Xerox 6180N - Phaser Color Laser Printer에 대해서도 마찬가지입니다: 설치 매뉴얼 (34 페이지), 사양 시트 (2 페이지), 사용자 설명서 (32 페이지), 사용자 설명서 (28 페이지), 설치 매뉴얼 (2 페이지), 보안 매뉴얼 (38 페이지), 릴리스 노트 (2 페이지), 설치 매뉴얼 (2 페이지), 시작하기 매뉴얼 (37 페이지), 매뉴얼 (34 페이지), 시작하기 매뉴얼 (34 페이지), 사용자 설명서 (32 페이지), 설치 및 운영 매뉴얼 (8 페이지), 평가자 매뉴얼 (16 페이지), 사양 (4 페이지)

Xerox 6180N - Phaser Color Laser Printer 매뉴얼
18

PCL Features and Additions

¨ The PCL tab in the Properties for a Queue has been
enhanced as follows.
¨ Operators may now save PCL resources on a job-by-job
basis, allowing for more routine saves. Previously, the save
resource function only occurred when the DocuSP controller
was shutdown.
¨ Operators may define the custom stock size for PCL custom
jobs in the job properties. This option introduces the ability to
define any size image for decomposition.
¨ A new check box allows the operator the ability to
automatically center custom sized stock in a manner similar
to the HP product line. When this feature is disabled, the
image is oriented to the side of the paper. This feature
provides HP 8100 bypass tray compatibility.
¨ The default line termination settings for PCL jobs can now be
set on the DocuSP UI. Previously, the line termination
settings had to be changed using a UNIX script.
¨ Line termination settings should not be used in a mixed PCL
and ASCII environment, because PCL data streams can
include other line termination escape sequences which could
change the line termination sequence without the operator's
knowledge.
¨ DocuSP 3.7x now supports HP PJL. Key features are
enabled for PJL data streams and include:
·
PJL Set Paper = Executive, Letter, A4, Legal, A3,
Ledger, Monarch, DL, C5, COM10, A5, Eurolegal, 14x17,
B5, JISB4, JISB5, Hagaki, Ohagaki, ISOB4, and Custom
·
PJL Set Duplex = Off, On
·
PJL Enter Language = PCL and PCL XL
·
PJL Set Binding = Longedge, Shortedge
¨ The operator may set the system to ignore PJL commands.
This emulates the behavior of prior releases.
DocuSP 3.6 to 3.7 Differences Document