Xerox DocuPrint 155MX 사용자 설명서 - 페이지 19
{카테고리_이름} Xerox DocuPrint 155MX에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox DocuPrint 155MX 32 페이지. Freeflow print server micr user guide
Xerox DocuPrint 155MX에 대해서도 마찬가지입니다: 사양 (2 페이지), 사용자 설명서 (40 페이지)
페이지 인쇄
Image quality for PCL
Using AFP fonts for IPDS printing
Implementing AFP MICR fonts
MICR User Guide
The MICR fonts provided with the MX printers have been
optimized for MICR printing on these systems. Therefore, it is
important that darkening of the bitmap font is disabled when
printing PCL MICR documents. To ensure that bitmap font
darkening is disabled, follow these steps:
1. Log on as Administrator.
2. Select the Printer pull-down menu and select Image Quality.
3. In the Raster Image Processors list, do one of the following:
•
If you are using the 300 dpi font (for example, E13B-
P.HPP), double-click PCL 300.
•
If you are using the 600 dpi E13B font (for example, E13B-
609.HPP) or the CMC7 font (for example,
CMC72510.HPP), double-click PCL 600.
The PCL Image Quality window opens.
4. In the Thickening Control section, if the Bitmap Fonts check
box is selected, deselect it. Click OK.
5. If changes were made, a Restart confirmation prompt appears.
Click Yes to restart the Xerox FreeFlow® Print Server
software.
To implement the Xerox AFP MICR fonts in your existing IBM
MICR application, perform the steps from the following
appropriate section.
For information on installing the Xerox AFP MICR fonts, refer to
Installing Xerox AFP MICR Fonts, delivered with your MICR
system.
Existing IBM MICR implementation
1. Install the Xerox MICR fonts on the host AFP system.
2. Ensure that all other fonts used for MICR applications have
been converted to 300 dpi and loaded into the 300 dpi font
library.
3. Substitute the Xerox 300 dpi AFP MICR fonts for the line-
named IBM originals.
15