Xerox DocuPrint 75 MX 사용자 설명서 - 페이지 21

{카테고리_이름} Xerox DocuPrint 75 MX에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox DocuPrint 75 MX 40 페이지. Freeflow print server micr user guide
Xerox DocuPrint 75 MX에 대해서도 마찬가지입니다: 사용자 설명서 (32 페이지)

페이지 인쇄

Setting the font resolution

Setting the font resolution for the queue

MICR User Guide

Before printing MICR jobs, you must set the resolution

attribute appropriately for the queue to which you will be

sending the jobs.

The following table lists the different MICR font formats

and the resolution at which each font should be printed.

Font name and format

LCDS

PCL

LCDS

PCL

If your document contains scalable fonts or simple line art

generated at 600 dpi, the differences between printing at

300 or 600 dpi are subtle. However, if your document

contains bitmaps with a resolution of 600 dpi, printing at

300 dpi causes a degradation of image quality. To

preserve image quality, regenerate the bitmaps at 300 dpi.

Before sending a document to a print queue, you must

make sure that the resolution of the font used in the

document is the same as that specified for the queue.

If the font and queue resolutions do not match (for

example, a document with a 600 dpi font is sent to a 300

dpi queue), the font may print with subtle distortions and

could be rejected at the bank.

Follow this procedure to set the font resolution as a queue

property:

1. Click the Queue Manager icon on the DocuSP

window.

2. On the Queue Manager window, right-click the desired

queue name, and select Properties from the pop-up

menu.

MICR fonts

Required resolution

E13B

300 DPI

300 DPI and 600 DPI

300 and 600 DPI

CMC7

300 DPI

600 DPI

2-15