Xerox Legacy 4110 고객 릴리스 노트 - 페이지 9

{카테고리_이름} Xerox Legacy 4110에 대한 고객 릴리스 노트을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Legacy 4110 24 페이지. Server & controller solutions printing from mac os
Xerox Legacy 4110에 대해서도 마찬가지입니다: 운영자를 위한 매뉴얼 (1 페이지), 복사기 기본 작동 지침 (2 페이지), 운영자를 위한 매뉴얼 (1 페이지), 릴리스 정보 (1 페이지), 보충 설명서 (1 페이지), 인쇄 옵션 (24 페이지), 인쇄 매뉴얼 (24 페이지)

Printing

Job batching

If job batching is enabled, multiple jobs received by the Fiery EXP4110 close together are

printed as a single job. Control job batching through the Job Batching Delay option in Setup.

If this option is set to 0, job batching is disabled. If this option is set to a non-zero value, jobs

that are received within this number of seconds are batched.

If job batching is enabled:

• The job information displayed on the printer for batched jobs is not correct, because the

jobs are considered one job. Command WorkStation and the Job Log show the correct

information for the individual jobs.

• After printing is complete, the job status remains Printing until the Job Batching

Delay expires.

• Jobs with the Save Fast Reprint option selected and jobs printed through the Print and

Hold command in Command WorkStation are not batched. They are always printed as

individual jobs.

Printing delay on Windows 2000/XP

With Windows 2000 and Windows XP, all MS-DOS printing is done through the Windows

NT spooler system. In order to know when to send a job to the spooler, a timeout is set

on the printer port. Once a job is printed to the port, if this timeout passes with no more data

presented to the port, the print job is sent to the spooler. The default timeout is 15 seconds.

Therefore, there is a 15-second delay before the print job starts printing. Microsoft has

documented this issue in the following web page:

http://support.microsoft.com/default.aspx?id=kb;en-us;Q101850

A computer using any version of Windows 2000 or Windows XP (including the Windows

2000 data server) requires the following changes. If you use Citrix or terminal services, the

changes must also be implemented on the Windows 2000 server running Citrix/Terminal

Services, as well as each workstation that uses the Windows 2000 or Windows XP

operating system.

To decrease the timeout, use the following procedure to edit these registry settings:

• HKEY_LOCAL_MACHINE

• SYSTEM

• CurrentControlSet

• Control

• WOW

• LPT_Timeout

WARNING: Using REGEDT32 can cause serious damage to your operating system.

Make sure to follow these steps exactly.

Page 9

Part Number: 45051581