Xerox Legacy 4112 사용 설명서 - 페이지 8

{카테고리_이름} Xerox Legacy 4112에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Legacy 4112 46 페이지. Copier/printer backup/restore/migrate tools
Xerox Legacy 4112에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (34 페이지), 사양 (2 페이지), Pdl 참조 매뉴얼 (28 페이지), 사용자 설명서 부록 (20 페이지), 고객 릴리스 노트 (8 페이지), 빠른 시작 매뉴얼 (30 페이지), 빠른 시작 매뉴얼 (34 페이지), 개요 (8 페이지), 개요 (8 페이지), 개요 (8 페이지), 빠른 시작 매뉴얼 (26 페이지)

Machine setup

4. From Local Area Connections, select the Support tab; your computer's IP address is listed

there.

5. Record the computer's IP address; this will be used later in this chapter.

6. Close the Local Area Connections Status window. Close the Network Connections and

Control Panel windows, if applicable.

Obtain machine information

Obtain your machine's static IP address by performing the following steps:

Note

It is recommended that you use a static IP address on your machine (versus a DHCP

address). If your machine uses DHCP, you must specify the DNS host name; this is discussed in

the section entitled Machines using DHCP on page 2-3.

1. From the machine's User Interface (UI), press the Machine Status button on the Control

Panel.

2. From the Machine Information tab, select Print Reports...

3. Select Copy Reports, Configuration Report, and then press the Start button on the

Control Panel.

4. Collect the printed Configuration Report from the machine's exit area.

5. After the report is printed, select Close until you are returned to the Machine Information

tab (Tools) on the machine's UI.

6. Press the Services button on the Control Panel to exit Machine Status.

7. On the printed Configuration Report, locate and record the machine's host/domain name.

2-2

Xerox 4112/4127 Copier/Printer

Backup/restore/migrate tools