Xerox Nuvera 100 계획 매뉴얼 - 페이지 8

{카테고리_이름} Xerox Nuvera 100에 대한 계획 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Nuvera 100 22 페이지. Production system
Xerox Nuvera 100에 대해서도 마찬가지입니다: 사양 시트 (2 페이지), 기능 설명서 (34 페이지), 사용자 설명서 (40 페이지), 운영 매뉴얼 (34 페이지), 참조 매뉴얼 (2 페이지), 계획 매뉴얼 (20 페이지), 참조 매뉴얼 (42 페이지), 빠른 참조 (2 페이지), 설치 매뉴얼 (2 페이지), 보충 설명서 (48 페이지), 계획 매뉴얼 (38 페이지), 계획 매뉴얼 (16 페이지), 참조 매뉴얼 (2 페이지), 사양 (2 페이지), 힌트 및 팁 매뉴얼 (18 페이지), 힌트 및 팁 매뉴얼 (18 페이지), 시작하기 매뉴얼 (26 페이지), 시작하기 매뉴얼 (30 페이지)

페이지 인쇄
Xerox Nuvera 100 계획 매뉴얼
Xerox Document Binder 120-D (DB120-D)

Performance Specifications

Binding
Paper Size / Weight
Cover Sizes
Spine Width / Approx. # of
sheets
Tray Capacity
Warm-up Time
Input Height
Listed below are the Performance Specifications for the
Document Binder 120-D.
US Specifications
8.5" x 11" (216 x 279 mm)
Note: A conversion kit allowing for usage
of A4 / 115V is available. These kits
would be applicable on some specific
markets and special applications.
20 lbs (75 gsm) – 32 lbs index (120 gsm)
bond and flush cut tabs.
Weights above 32 lbs. (120 gsm) should
be used only as dividers or inserts.
Based on 20 lbs (75 gsm) paper
1/16" / 2 – 15 sheets (∗)
1/8" / 16 – 30 sheets
1/4" / 31 – 60 sheets
3/8" / 61 – 90 sheets
1/2" / 91 – 120 sheets
(∗) Minimum sheets for 1/16" dependent
on connected printer. In walk-up mode
however, 1 – 15 sheets are allowed
regardless of connected printer.
Input Tray: 2 pre-loaded cassettes
containing 150 covers each
Output Tray: 20 – 100 finished sets
depending on spine width.
Approx. 2 minutes
34" (860 mm) and 40.2" (1021 mm)
1-2
European Specifications
A4 (210 x 297 mm)
Note: A conversion kit allowing for usage
of Letter size / 230V is available. These
kits would be applicable on some specific
markets and special applications.
20 lbs (75 gsm) – 32 lbs index (120 gsm)
bond and flush cut tabs.
Weights above 32 lbs. (120 gsm) should
be used only as dividers or inserts.
Based on 80 gsm paper
1.5 mm / 2 – 13 sheets (∗)
3 mm / 14 – 28 sheets
6 mm / 29 – 55 sheets
9 mm / 56 – 84 sheets
13 mm / 85 – 120 sheets
(∗) Minimum sheets for 1.5 mm dependent
on connected printer. In walk-up mode
however, 1 – 15 sheets are allowed
regardless of connected printer.
Input Tray: 2 pre-loaded cassettes
containing 150 covers each
Output Tray: 20 – 100 finished sets
depending on spine width.
Approx. 2 minutes
34" (860 mm) and 40.2" (1021 mm)