Xerox Nuvera 100 설치 매뉴얼 - 페이지 2

{카테고리_이름} Xerox Nuvera 100에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Nuvera 100 2 페이지. Production system
Xerox Nuvera 100에 대해서도 마찬가지입니다: 사양 시트 (2 페이지), 기능 설명서 (34 페이지), 계획 매뉴얼 (22 페이지), 사용자 설명서 (40 페이지), 운영 매뉴얼 (34 페이지), 참조 매뉴얼 (2 페이지), 계획 매뉴얼 (20 페이지), 참조 매뉴얼 (42 페이지), 빠른 참조 (2 페이지), 보충 설명서 (48 페이지), 계획 매뉴얼 (38 페이지), 계획 매뉴얼 (16 페이지), 참조 매뉴얼 (2 페이지), 사양 (2 페이지), 힌트 및 팁 매뉴얼 (18 페이지), 힌트 및 팁 매뉴얼 (18 페이지), 시작하기 매뉴얼 (26 페이지), 시작하기 매뉴얼 (30 페이지)

If the information is correct, select [Install]. The installation process begins.

10. At the Install Complete window, select [Done]. You are now ready to begin using Remote Print Server software.

11. Eject the CD-ROM.

To install the Remote Print Server on a Sun/Solaris platform:

1. Insert the FreeFlow Remote Print Server CD-ROM into your CD-ROM drive. If the CD-ROM displays a File

Manager window, close the File Manager window.

2. Open a Terminal window. Right-click on the desktop and select Tools: Terminal.

3. Login with the user account that will be running the FreeFlow Remote Print Server software. The software can

only be run under the account used during the installation. You do not have to login as root in order to install the

software.

4. At the prompt, type: /cdrom/cdrom0/Disk1/InstData/Solaris/VM/install.bin

5. Press <Enter>. The script will run.

6. At the Introduction window, select [Next].

7. At the License Agreement window, select to accept the terms of the license agreement. Select [Next].

8. At the Choose Install Set window, ensure that all boxes are checked, and select [Next].

NOTE: If your system is only connecting to one version of a DocuSP / FreeFlow Print Server system, then only

check the necessary box. Check all applicable boxes if you have a mixed DocuSP / FreeFlow environment.

9. At the Choose Install Folder window, select [Next] to install to the default folder.

10. At the Choose Link Folder, select your choice, and select [Next].

11. At the Pre-Installation Summary window, ensure that the information displayed accurately reflects your choices.

Check that the available memory is more than what is required for the installation. If the information is correct,

select [Install]. The installation process begins.

12. At the Installation Complete window, select [Done]. You are now ready to begin using the Remote Print Server.

13. Eject the CD-ROM by typing eject cdrom and pressing <Enter> in the terminal window.

Getting started - Windows

1. Open the FreeFlow Remote Print Server software.

2. Select [Printer], [Add printer...].

3. Enter the printer host name or IP address.

4. Select [Find Name] or enter the name of the printer to be displayed on the Remote Print Server interface.

5. Select [OK].

6. For further information on this and adding printers using discovery, select the [Help] button.

Getting started – Solaris

1. Open a Terminal window.

2. At the prompt, type FreeFlow_Remote_Print_Server and press <Enter>.

3. Enter the printer host name or IP address, and the name of the printer to be displayed on the Remote Print

Server interface.

4. Select [OK].

5. For further information, select the [Help] button.

701P46671

May 2007

Page 2 of 2