Xerox Nuvera 100 보충 설명서 - 페이지 22

{카테고리_이름} Xerox Nuvera 100에 대한 보충 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Nuvera 100 48 페이지. Production system
Xerox Nuvera 100에 대해서도 마찬가지입니다: 사양 시트 (2 페이지), 기능 설명서 (34 페이지), 계획 매뉴얼 (22 페이지), 사용자 설명서 (40 페이지), 운영 매뉴얼 (34 페이지), 참조 매뉴얼 (2 페이지), 계획 매뉴얼 (20 페이지), 참조 매뉴얼 (42 페이지), 빠른 참조 (2 페이지), 설치 매뉴얼 (2 페이지), 계획 매뉴얼 (38 페이지), 계획 매뉴얼 (16 페이지), 참조 매뉴얼 (2 페이지), 사양 (2 페이지), 힌트 및 팁 매뉴얼 (18 페이지), 힌트 및 팁 매뉴얼 (18 페이지), 시작하기 매뉴얼 (26 페이지), 시작하기 매뉴얼 (30 페이지)

Tape Client overview

Job recovery

1-6

If a Tape Client crash occurs during tape processing, it recovers

to its last known state at the start of a file. The Tape Client

maintains a file that contains all the information needed to

recover from a rollover. The job is always recovered to the start,

not the middle, of a file.

The Tape Client makes two attempts to recover. If it is not able to

do so, a message is displayed and the Tape Client reverts to its

initial state.

If the tape volume that is currently loaded is not the one that is

needed for recovery, or if the Tape Client cannot determine if it is,

you are prompted to load the correct volume. When you load the

requested tape, the file is sent from the beginning. (This could

cause some pages to be reprinted.)

If the job that is currently being received is canceled at the

controller, the Socket Gateway closes the connection to the Tape

Client. The Tape Client stops reading the data and rewinds or

unloads the tape if requested.

In case of a system crash during printing, the Tape CLient

detects a communication error and aborts the job. AFter a

restart, DocuSP will continue to print the data that has been

transferred and processed.

Tape Client Job Submission Guide