Xerox Nuvera 100 힌트 및 팁 매뉴얼 - 페이지 13

{카테고리_이름} Xerox Nuvera 100에 대한 힌트 및 팁 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Nuvera 100 18 페이지. Production system
Xerox Nuvera 100에 대해서도 마찬가지입니다: 사양 시트 (2 페이지), 기능 설명서 (34 페이지), 계획 매뉴얼 (22 페이지), 사용자 설명서 (40 페이지), 운영 매뉴얼 (34 페이지), 참조 매뉴얼 (2 페이지), 계획 매뉴얼 (20 페이지), 참조 매뉴얼 (42 페이지), 빠른 참조 (2 페이지), 설치 매뉴얼 (2 페이지), 보충 설명서 (48 페이지), 계획 매뉴얼 (38 페이지), 계획 매뉴얼 (16 페이지), 참조 매뉴얼 (2 페이지), 사양 (2 페이지), 힌트 및 팁 매뉴얼 (18 페이지), 시작하기 매뉴얼 (26 페이지), 시작하기 매뉴얼 (30 페이지)

Xerox Nuvera

CQ#43522 Annotation-2

Description

When performing a "Copy and Save" or "Print and Save" operation with annotations turned

on, the reprint of the saved job will be unreadable.

Workaround

Perform a "Save" operation and then "Print" the saved job.

Description

When performing a Configuration Backup, make sure you do not exceed the maximum disk

size of the CD. If you do, the backup will fail without an indication as to why.

Workaround

None.

Description

Operator needs to view PDF or HTML files on a CD.

Workaround

Do one of the following:

1. To view PDF files, go to [Launch -> Applications -> Graphics -> PDF Document Viewer]

and open the PDF on the CD.

2. To view HTML files, go to [System -> Remote Services -> Options -> Launch Web

Browser].

Description

When a job is successfully proofed, there appears to be no indication that it has been proofed.

Workaround

Ensure the "Proof/Review Status" column is in the visible portion of the table. This column is

identified by a computer icon in the header. If the column is at the end of the table (left side),

move it to the beginning (right side). A successfully proofed job will have an icon appear in this

column that looks like a green check mark over a document.

Hints and Tips Guide

Release Issues

3-3