Xerox Nuvera 100 힌트 및 팁 매뉴얼 - 페이지 13

{카테고리_이름} Xerox Nuvera 100에 대한 힌트 및 팁 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Nuvera 100 18 페이지. Production system
Xerox Nuvera 100에 대해서도 마찬가지입니다: 사양 시트 (2 페이지), 기능 설명서 (34 페이지), 계획 매뉴얼 (22 페이지), 사용자 설명서 (40 페이지), 운영 매뉴얼 (34 페이지), 참조 매뉴얼 (2 페이지), 계획 매뉴얼 (20 페이지), 참조 매뉴얼 (42 페이지), 빠른 참조 (2 페이지), 설치 매뉴얼 (2 페이지), 보충 설명서 (48 페이지), 계획 매뉴얼 (38 페이지), 계획 매뉴얼 (16 페이지), 참조 매뉴얼 (2 페이지), 사양 (2 페이지), 힌트 및 팁 매뉴얼 (18 페이지), 시작하기 매뉴얼 (26 페이지), 시작하기 매뉴얼 (30 페이지)

Xerox Nuvera

Release Issues

Issues remaining from previous release

Description

Customer is unable to eject CD tray from GUI or CD-ROM button and unable to read CD. This

stops working after the first successful eject.

Workaround

1. Insert Media in Tray using "Hard Button" in the CD Tray.

2. If the Pop-Up Menu doesn't show up, go to Print from File Button and select "Browse".

3. Press "Re-display" to show the pop-up menu. (At this point, we may see "No disk in drive"

and it can be ignored.)

4. Do any further operation related to CD/DVD.

5. After completion of Media operation, use only "Soft eject in the UI" to eject the CD.

Description

When 'After Every Tray Cycle' tray confirmation is enabled, and a tray is cycled, all tray

programming, except for Stock Size, in the pop-up confirmation window is set to default.

Workaround

If you are using named stock or stock weight different than the queue default weight then it is

recommended that you set [System Preferences -> Stocks and Trays -> Tray Confirmation] to

'None'. If you do not, then each time the tray confirmation pop-up window opens all the

values will be set to the queue default values.

Description

11x17 and 8 1/2x14 build jobs are printing with second segment as 8.5x11 instead of 11x17.

Workaround

When using Build Job, please leave the paper selection set to APS before entering Build Job.

Once you are in Build Job you can change the paper selection to any stock you wish. You also

can leave it set to APS.

Description

Books printed on 60gsm paper that have heavy (90gsm and higher) inserts can cause last

several pages in the book to be skewed.

Hints and Tips Guide

3-3