Xerox Phaser 6100DN 설치 매뉴얼 - 페이지 24

{카테고리_이름} Xerox Phaser 6100DN에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Phaser 6100DN 34 페이지. Disk overwrite installation and usage
Xerox Phaser 6100DN에 대해서도 마찬가지입니다: 사양 (2 페이지), 사용자 설명서 (32 페이지), 브로셔 및 사양 (4 페이지), 사용자 설명서 (28 페이지), 설치 매뉴얼 (2 페이지), 보안 매뉴얼 (38 페이지), 설치 매뉴얼 (2 페이지), 릴리스 노트 (2 페이지), 시작하기 매뉴얼 (37 페이지), 매뉴얼 (34 페이지), 매뉴얼 (34 페이지), 시작하기 매뉴얼 (34 페이지), 사용자 설명서 (32 페이지), 설치 및 운영 매뉴얼 (8 페이지)

Xerox Phaser 6100DN 설치 매뉴얼
FREEFLOW PRINT SERVER 6.0.xx

W-6: Network configuration worksheet

18
Fill out the appropriate worksheet for the network configuration
the customer is using. This information is used to configure the
network through the FreeFlow Print Server Network
Configuration screens.
For further information on each network configuration, refer to
the FreeFlow Print Server on-line help.
IP Configuration
Two options are available for configuring TCP/IP on the
FreeFlow Print Server.
Static IP configuration requires that the System Administrator
enter the hostname, IP address, default router gateway, and
subnet mask information into the Network configuration UI. This
information is available on Worksheet W-1.
DHCP, or Dynamic Host Configuration Protocol, retrieves the
values for the configuration from the DHCP server on the
network. The System Administrator can rewrite the hostname.
NIS/NIS+
The Network Information Service (NIS and NIS+) provides
simple network lookup services. The purpose of NIS and NIS+
is to provide information that needs to be known throughout the
network to all machines on the network.
If the Domain Name, Server IP Address, and Server Name are
not known, select Find One in the dialog. The appropriate
information is obtained from the NIS/NIS+ server on the
network. The server must be configured to accept broadcast
requests.
Data Element
Find NIS+ Server
NIS/NIS+ Domain Name
NIS/NIS+ Server IP address
NIS/NIS+ Server Name
XEROX FREEFLOW PRINT SERVER
GETTING READY FOR THE PRINT SERVER INSTALLATION
Customer Value
Find one
Specify