Xerox Phaser 6100DN 시작하기 매뉴얼 - 페이지 36

{카테고리_이름} Xerox Phaser 6100DN에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Phaser 6100DN 37 페이지. Disk overwrite installation and usage
Xerox Phaser 6100DN에 대해서도 마찬가지입니다: 설치 매뉴얼 (34 페이지), 사양 (2 페이지), 사용자 설명서 (32 페이지), 브로셔 및 사양 (4 페이지), 사용자 설명서 (28 페이지), 설치 매뉴얼 (2 페이지), 보안 매뉴얼 (38 페이지), 설치 매뉴얼 (2 페이지), 릴리스 노트 (2 페이지), 매뉴얼 (34 페이지), 매뉴얼 (34 페이지), 시작하기 매뉴얼 (34 페이지), 사용자 설명서 (32 페이지), 설치 및 운영 매뉴얼 (8 페이지)

DOCUSP 4.1

9. When the installation is complete, you can start the Acrobat

Reader by typing:

/opt/Acrobat4/bin/acroread – iconic

12. The Adobe Acrobat Reader is started and placed as an

icon on the desktop. Open the Reader, and select [File],

[Open]. Enter the path to the customer documentation

CDROM (/cdrom/65docs) to open one of the PDF files on

the documentation CDROM.

NOTE: Steps 11 and 12 will have to be performed every

time the system is shutdown and restarted unless a path is

set up to the Adobe Acrobat Reader executable.

NOTE: If an icon does not appear, refer to the next

procedure.

In order to launch the Adobe Acrobat Reader from the CDE

console, located in the bottom center of the screen, perform the

following steps:

1. Open the File Manager.

2. Change to the /opt/Acrobat/bin folder.

3. Open the folders pop up menu by selecting the up arrow

above the file drawer icon on the CDE console.

4. Use the left mouse button to select and drag the acroread

file from the File Manager window to the Install Icon on the

Folders pop up menu. This will install an icon that can be

selected to launch Acrobat Reader.

When the Acrobat Reader icon is selected, a window titled

Action:Run opens. Select [OK] and a run window opens, then

Acrobat Reader opens. Minimize the Run window if desired;

closing the Run window closes the Acrobat Reader.

XEROX DOCUMENT SERVICES PLATFORM SERIES

GETTING STARTED