Econoco SteamButler ST500 매뉴얼 - 페이지 7

{카테고리_이름} Econoco SteamButler ST500에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Econoco SteamButler ST500 8 페이지.

Below is a chart detailing the most common problems, their causes, and their solutions.

Before shipping any appliance to a service center, please check to make sure that the

solution is not listed here.

PROBLEM

Steamer

DOES NOT

get hot.

No steam.

Water drips from

the nozzle.

CAUSE

Steamer is not plugged

into an outlet.

Automatic shut-off has

engaged. The water bottle is

empty and the reservoir has

drained

Water level is too low.

Condensation has formed

inside the steamer hose

Trouble Shooting

SOLUTION

Plug the appliance in.

Push the ON/OFF switch to the

OFF position. Fill the water bottle

and replace inside the reservoir.

Once the appliance is refilled,

turn the power ON.

Push the ON/OFF switch to the

OFF position. Refill the water

bottle and replace inside the

reservoir. Once the appliance is

filled, turn the power ON.

Hold the hose upright and allow

excess moisture to drain back

into the base of the unit.