Alder LIFE 설치 지침 - 페이지 3
{카테고리_이름} Alder LIFE에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Alder LIFE 3 페이지. Panel shower
LIFE
Panel Shower
TM
WISH Basin Mixer
SAVE MODE
TM
DIAGRAM #1
• Remove top cover from Rain Shower Arm (packed separately)– 6 screws
• Secure Rain Shower Arm to Panel Shower Body - 4 nuts & bolts (supplied)
DIAGRAM #2
• Connect Rain Shower to Shower Pipe and seal with Clamp (supplied)
• Replace top cover
• Assemble Handset Holder to Panel Shower Body
DIAGRAM #3
• Recommended 19BP height is 1900mm for typical user height 1800mm – see Man Figure Diagram Page # 1
• If desired user height different to 1800mm, then adjust 19BP height accordingly
• Reduce length of 19BP Shower Outlet to 10-15mm with Nipple Cutter
• Recommended Nipple Cutter – Reliance Worldwide Product Code A60-001
• Front edge of 19BP Shower Outlet is a sealing surface and must be flat and smooth
• Attach Top Wall Bracket at 50mm above the 19BP and Bottom Wall Bracket at 800 below Top Wall Bracket
• Dimension 50mm – from centre line of Wall Bracket Oval Holes to centre of 19BP
• Attach Wall Brackets with screws & plastic plugs (supplied) – 6mm masonry drill bit recommended
• Note Laser Markings on Wall Brackets to assist with vertical alignment
• Note Oval Screw Holes in Wall Brackets to assist with horizontal alignment in DIAGRAM #4
DIAGRAM #4
• Test straightness of Wall Brackets with a one metre long Levelling Tool
• If Panel Shower not vertical – adjust Wall Brackets accordingly
DIAGRAM #5
• Assemble Brass Elbow with Loose Nut onto 19 BP Shower Outlet
• Make sure that Brass Elbow points down and can rotate when in the sealed position
• Connect Flexible Connector to Brass Elbow with Loose Nut – tighten with integral yellow spanner
DIAGRAM #6
• Hook Panel Shower onto Wall Brackets – assemble Shower Hose and Handset
Phone
1800 800 919
| Fax
08 6217 0699
| Email
INSTALLATION INSTRUCTIONS
CODE 40092
| Selection Centre
Featuring the Exclusive Collection
FOR MORE INFORMATION VISIT
www.aldertapware.com.au
15 Mumford Place, Balcatta WA 6021