eControls C365T21 사용자 설명서 - 페이지 2

{카테고리_이름} eControls C365T21에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. eControls C365T21 4 페이지.
eControls C365T21에 대해서도 마찬가지입니다: 설치 프로그램 및 사용자 설명서 (13 페이지)

페이지 인쇄

Press the touchscreen with your fingertip only, using a

firm touch. Do not use a sharp object such as a pen or

pencil.

Set Time and Day

Touch here to change the

time and day of the week.

ENTER

Set System Mode

Touch the SYSTEM key to display the SYSTEM MODES - OFF, HEAT,

COOL, or AUTO. When HEAT is selected, the heating setpoint is

displayed. When COOL is selected, the cooling setpoint is displayed. In

AUTO or OFF, the setpoint for the last system call is displayed.

Upstairs

Heat

Airflow %

Set To

Auto

Schedule

Downstairs

Inside

Day

SYSTEM

MODE

Set Fan Mode

Touch the

FAN

key to display the FAN MODES - AUTO or ON. AUTO is

the most commonly used setting.

Upstairs

Airflow %

Cool

Set To

Auto

Schedule

Downstairs

Inside

Day

SYSTEM

MODE

Upstairs

Airflow %

Cool

Set To

Auto

Schedule

Downstairs

Day

MODE

CHANGE THE HOUR

Touch the UP/DOWN keys to change the

HOUR. Touch NEXT to save the hour and

go to change the minute.

CHANGE THE MINUTE

Touch the UP/DOWN keys to change the

MINUTE. Touch NEXT to save the minute

and go to change the day of the week.

CHANGE THE DAY OF THE WEEK

Touch the UP/DOWN keys to change the

DAY OF THE WEEK.

Touch ENTER to save the day of the

week and return to thermostat operation.

Touch and hold the SYSTEM key

to select:

OFF

Heating and cooling systems

are off.

HEAT

Only heating calls are enabled.

COOL

Only cooling calls are enabled.

AUTO

FAN

AUTO

Heating or Cooling calls are

enabled.

Touch FAN key to select:

AUTO

Fan is activated only during

heating or cooling calls.

COOL

Fan is continuously on.

AUTO

FAN

Set Thermostat Mode

Touch the

MODE

SCHEDULE, HOLD and VACANT.

Upstairs

Airflow %

Auto

Downstairs

Day

Inside

COOL

SYSTEM

MODE

AUTO

FAN

Changing the Setpoint Temperature

The UP/DOWN keys are used to change the setpoint temperature.

Upstairs

Airflow %

Auto

Downstairs

Day

MODE

To display the opposing system setpoint, touch the area shown below.

Upstairs

Airflow %

Auto

Downstairs

Day

MODE

Temperature Override

If the thermostat is in SCHEDULE MODE, the setpoint temperature can

be overridden using the UP/DOWN keys. The setpoint temperature will

be held for 3 hours. After 3 hours the thermostat returns to normal

operation.

Upstairs

Airflow %

Auto

Downstairs

Day

MODE

Displaying the Upstairs Temperature

The thermostat displays the downstairs temperature and is indicated

by INSIDE. The upstairs temperature will be indicated by INSIDE2. In

Night Mode, the thermostat displays the upstairs temperature,

indicated by INSIDE2.

Upstairs

Airflow %

Auto

Downstairs

Day

MODE

key to display the THERMOSTAT MODES -

Touch and hold the MODE key to select:

SCHEDULE

Cool

Setpoint temperatures are changed

Set To

at scheduled times defined by the user.

Schedule

Inside

COOL

HOLD

SYSTEM

Setpoint temperatures are set by

AUTO

the user. No schedule is used.

FAN

VACANT

Setpoint temperatures are kept at the

Displays the Mode.

vacant temperatures set by the installer.

Touch the UP key to raise setpoint

temperature.

Cool

Set To

Touch the DOWN key to lower setpoint

Schedule

Inside

COOL

temperature.

SYSTEM

An active heating call is indicated by

AUTO

HEAT blinking. An active cooling call

FAN

is indicated by COOL blinking.

Touch here to display and change

Heat

the opposing setpoint temperature.

Set To

Schedule

Touch the UP/DOWN keys to change the

Inside

COOL

setpoint temperature for the opposing

SYSTEM

system. The thermostat will return to

AUTO

displaying the active setpoint after about

FAN

30 seconds.

Touch the UP/DOWN keys to adjust the

setpoint temperature.

Cool

Set To

After 3 hours, the thermostat returns

Schedule

Inside

COOL

to normal thermostat operation.

SYSTEM

AUTO

FAN

To display the upstairs temperature,

touch the INSIDE temperature as

Cool

indicated. The thermostat will now

Set To

display the upstairs temperature,

Schedule

COOL

indicated by INSIDE2.

Inside2

SYSTEM

After about 30 seconds, the

AUTO

thermostat will return to displaying

FAN

the downstairs temperature.