eControls Comfort365 C365W21 사용자 설명서 - 페이지 3

{카테고리_이름} eControls Comfort365 C365W21에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. eControls Comfort365 C365W21 4 페이지.

페이지 인쇄

Temperature Override

If the thermostat is in SCHEDULE MODE, the setpoint temperature can

be overridden using the UP/DOWN keys. The setpoint temperature will

be held for 3 hours. After 3 hours the thermostat returns to normal

operation.

Upstairs

Airflow %

Cool

Set To

Auto

Schedule

Downstairs

Inside

COOL

Day

SYSTEM

AUTO

MODE

Set Thermostat Mode

Touch the

MODE

key to display the THERMOSTAT MODES -

SCHEDULE, HOLD and VACANT.

In SCHEDULE MODE, the setpoint temperature is automatically

changed at the scheduled times as long as the SYSTEM MODE is in

AUTO. In HOLD MODE, the thermostat uses the temperatures set by

the user, ignoring the schedule. In VACANT MODE, the thermostat

uses the energy saving Vacant heating and cooling setpoints set by the

installer until the mode is changed.

Upstairs

Airflow %

Cool

Set To

Auto

Schedule

Downstairs

Inside

COOL

Day

SYSTEM

AUTO

MODE

Displays the Mode.

Changing the Setpoint Temperature

The UP/DOWN keys are used to change the setpoint temperature.

Upstairs

Airflow %

Cool

Set To

Auto

Schedule

Downstairs

Inside

COOL

Day

SYSTEM

AUTO

MODE

To display the opposing system setpoint, touch the area shown below.

Upstairs

Heat

Airflow %

Set To

Auto

Schedule

Downstairs

Inside

Day

COOL

SYSTEM

AUTO

MODE

Touch the UP/DOWN keys to adjust the

setpoint temperature.

After 3 hours, the thermostat returns

to normal thermostat operation.

FAN

Touch and hold the MODE key

to select:

SCHEDULE

Setpoint temperatures are changed

at scheduled times defined by the user.

HOLD

Setpoint temperatures are set by

FAN

the user. No schedule is used.

VACANT

Setpoint temperatures are kept at the

vacant temperatures set by the installer.

Touch the UP key to raise setpoint

temperature.

Touch the DOWN key to lower setpoint

temperature.

An active heating call is indicated by

HEAT blinking. An active cooling call

FAN

is indicated by COOL blinking.

Touch here to display and change

the opposing setpoint temperature.

Touch the UP/DOWN keys to change the

setpoint temperature for the opposing

system. The thermostat will return to

displaying the active setpoint after about

FAN

30 seconds.

Displaying the Upstairs Temperature

The thermostat displays the downstairs temperature and is indicated

by INSIDE. The upstairs temperature will be indicated by INSIDE2. In

Night Mode, the thermostat displays the upstairs temperature,

indicated by INSIDE2.

Upstairs

Airflow %

Cool

Set To

Auto

Schedule

Downstairs

Day

COOL

Inside2

SYSTEM

AUTO

MODE

Overriding Automatic Airflow

In AUTOMATIC AIRFLOW MODE, the user can override the airflow to

the upstairs and downstairs by pressing AIRFLOW % in the area

shown and then use the UP/DOWN keys to adjust the airflow. After 3

hours, the thermostat returns to automatic operation. UPSTAIRS,

AIRFLOW% and DOWNSTAIRS blink when in airflow override.

Upstairs

Airflow %

Auto

Hold

Downstairs

Inside

COOL

Eve

SYSTEM

AUTO

MODE

This area will blink when

in airflow override.

Terminating Airflow Override

AIRFLOW OVERRIDE can terminated by pressing

area shown and then pressing the Mode key. The thermostat returns

to automatic airflow control. The AIRFLOW % returns to the airflow

prior to the override.

Upstairs

Airflow %

Hold

Downstairs

Inside

Eve

COOL

SYSTEM

AUTO

MODE

Turning Nighttime Airflow Option On or Off

When bedrooms are located upstairs, the NIGHTTIME AIRFLOW

option can be used to save energy. The thermostat uses the upstairs

temperature sensor for controlling heating and cooling calls, as if the

thermostat has been moved upstairs. The airflow downstairs is reduced

and the upstairs airflow is increased.

Upstairs

Airflow %

Downstairs

Night

ENTER

To display the upstairs temperature,

touch the INSIDE temperature as

indicated. The thermostat will now

display the upstairs temperature,

indicated by INSIDE2.

After about 30 seconds, the

thermostat will return to displaying

FAN

the downstairs temperature.

Touch AIRFLOW% as shown.

Touch the UP key to increase the

upstairs airflow (the downstairs airflow

will automatically decrease). Touch the

DOWN key to increase downstairs airflow

(the upstairs airflow will automatically

decrease).

FAN

The override range is defined by the

installer during set up.

AIRFLOW %

Touch AIRFLOW% as shown.

Touch the MODE key to terminate airflow

override.

The thermostat returns to automatic

airflow control. The AIRFLOW % returns

to the airflow prior to the override.

FAN

Touch the MENU key to display

NIGHTTIME AIRFLOW option indicated

by nAF On or Off.

Touch the UP key to turn the option ON.

Touch the DOWN key to turn the option

OFF.

Touch the

key to save and go to

next option or touch the ENTER key to

save the options and return to normal

thermostat operation.

in the