Direct Supply Panacea AIR PRO 소유자 매뉴얼 - 페이지 13

{카테고리_이름} Direct Supply Panacea AIR PRO에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Direct Supply Panacea AIR PRO 20 페이지.

• Static Pressure & Low Air Loss Mode – Pressure is equalized in the mattress

cells between both alternating pressure channels to a comfort pressure

associated with the resident's weight to maximize immersion. After the

channels have adjusted to their set pressure, the pump then continuously

feeds air to the LAL manifold and to the advanced microclimate top cover.

• Static Pressure Mode – Pressure is equalized in the mattress cells between

both alternating pressure channels to a comfort pressure associated with the

resident's weight to maximize immersion. The pressure is then regulated and

maintained at the selected setting.

• Fowler Mode - Pressure in the mattress increases by 15% to 25% when the

bed is in Fowler position to avoid resident bottoming out.

10. Control unit functions (including power) can be locked out from being accidentally

changed, by simply pressing and holding the lock key until the light comes on.

Function can be regained by pressing and holding the lock key again until the light

goes out.

11. An audio-visual alarm is sounded in the event of power failure or when the hose is

disconnected from the unit.

12. The audio alarm can be muted using alarm silence key.

• WARNING — Only mute the alarm if a caregiver or medical professional will be

present with the resident while the alarm is silenced.

• CAUTION – Be careful not to puncture the mattress with needles or sharp

instruments. This may result in loss of integrity of the cover or internal air system.

NOTE: – This product is only one element of care in the prevention and treatment of

pressure ulcers by medical professionals and skilled caregivers to assist in the treatment

and prevention of decubitus ulcers for residents under their care. This product is not

designed to and cannot replace good caregiving practices and treatment including, but

not limited to:

• Appropriate nutrition and hydration, frequent positioning, routine skin

assessment, wound treatment, infection control, and other generally accepted

standards of care and prevention.

• Adequate training for and precautions by staff personnel for bed entrapment.

• Selection of an appropriate bed system to use with the product and proper

maintenance and use of the product.

• Testing of the product before each use.

1-800-634-7328

DirectSupply.com