Yamaha 141 소유자 매뉴얼 - 페이지 25

{카테고리_이름} Yamaha 141에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha 141 40 페이지. Owner's manual
Yamaha 141에 대해서도 마찬가지입니다: 빠른 작동 매뉴얼 (2 페이지)

Playing Back Recorded Performance Data

Press the [PLAY] button.

The [PLAY] button indicator and the indicator for the part that contains data light up,

and the recorded part starts playing back.

The parts can be turned on or off individually during playback. Refer to the

procedure on page 26.

Press the [PLAY] button to stop the playback

When the user song finishes playing back, this instrument automatically returns to

the previous mode.

To stop playback in the middle of a song, press the SONG [PLAY] button.

You can erase the entire recorded user song (including both [+ R] and [– L] part).

Press the [REC] button to engage Record Ready mode.

The [REC] and [+ R] button indicators flash.

If the left part ([– L]) contains data, [– L] button indicator lights up.

While holding down the [PLAY] button, press the [REC] button

to engage Erase Ready mode.

The [REC], [PLAY], [+ R] and [– L] button indicators flash.

To cancel the erase operation, press any button whose indicator is NOT flashing

(such as the [DEMO/SONG], [PIANO/VOICE] or [METRONOME] button).

Press the [REC], [PLAY], [+ R] or [– L] button to erase

recorded performance data.

The [REC], [PLAY], [+ R] and [– L] button indicators light up in turn from top to

bottom.

All button indicators turn off after data is erased.

Erasing individual part data

Hold down the [REC] button and press the [

Ready mode. (See step 2 on page 23.)

Press the [PLAY] button to start recording. Without playing the keyboard, press the

[PLAY] or [REC] button to stop recording. All data previously recorded for the

selected part will be erased.

The button indicator turn off.

R] or [

–

L] button to engage Part Record

Recording Your Performance

If the user song contains no

data, pressing the [PLAY]

button will not start playback.

YDP-161/141 Owner's Manual