Yamaha 480 소유자 매뉴얼 - 페이지 19

{카테고리_이름} Yamaha 480에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha 480 23 페이지. Yamaha natural sound compact disc player owner's manual

페이지 인쇄

CD SYNCHRONIZED RECORDING

This unit can make a tape deck's recording synchronized with CD play automatically. With this function, you can record a CD on

tape very easily and more precisely.

This recording method needs a YAMAHA tape deck compatible with this function. (Refer to the tape deck's operation manual to

know whether it is compatible or not.)

* This unit and the tape deck must be placed close to each other so that both of them can receive the signals from this unit's

remote control transmitter at the same time.

Load the disc.

OPEN/CLOSE

Load a tape on the tape deck.

The peak level searching function of this unit is useful

for adjusting recording level on the tape deck. (Refer

to page 18.)

This unit enters into the pause mode, and the tape deck

enters into the REC/PAUSE mode.

* In this mode, the time display on this unit flashes on and

off.

OPEN/CLOSE

PROG

TAPE

SPACE

S/F

SKIP

SYNCHRO

TIME

DIMMER

CLEAR

PEAK

RANDOM

REPEAT

PAUSE

PLAY

INDEX

STOP

–

OUTPUT LEVEL

If necessary, select the desired track.

Both CD play and tape deck recording begin.

* CD play begins a little later than recording.

If you want to stop recording temporarily and restart

recording from a desired track, follow steps 3–5 again.

To cancel this function

Press the STOP button.

Notes

•

To finish or stop the recording, make proper operations on

the tape deck.

•

Programmed sequence of tracks can also be recorded with

this function, instead of recording an entire disc. (Refer to

page 13–14 for the programming procedure.)

•

This function can also be used together with the automatic

tape-programming function. (Refer to page 15–17.)

SKIP

PLAY