Yamaha Acoustic 사용자 설명서 - 페이지 10

{카테고리_이름} Yamaha Acoustic에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Acoustic 35 페이지. Yamaha acoustic guitar-accessory: supplementary guide
Yamaha Acoustic에 대해서도 마찬가지입니다: 소유자 매뉴얼 (1 페이지), 설치 매뉴얼 (11 페이지), 보충 설명서 (32 페이지)

페이지 인쇄

Connections

CAUTION

• In order to prevent electric shock or damage to your equipment, turn OFF

the power on the guitar amp, etc., and set the MAGICSTOMP's volume to its

minimum level before making any connections.

• Use ONLY a Yamaha AC-10 Power Adaptor (or other adaptor specifically

recommended by Yamaha).

Using another adaptor may result in damage, overheating or fire, which

can be very dangerous.

• Make sure to use the recommended AC voltage as indicated on the power

adaptor.

• The MAGICSTOMP automatically switches "ON" when power is connected and supplied to the

device.

• Connect an acoustic guitar/electric acoustic guitar or any line level instrument such as a syn-

thesizer, etc., to the INPUT jack. The MAGICSTOMP can also be connected to the effect loop of

an amplifier, mixer, or other similar device.

• Set the INPUT LEVEL switch to match the output level of the instrument or device that is

connected to the MAGICSTOMP. If the sound is distorted when the switch is set to the HIGH

position, change the setting to LOW. If you feel output is low when the switch is set to the LOW

position, change the setting to HIGH.

• When using patches with stereo output, we recommend connecting the MAGICSTOMP's out-

put jacks to a stereo device.

• When connecting to a monaural device, use the OUTPUT L/MONO jack.

• When connecting the power adaptor to the MAGICSTOMP's AC IN jack, you can wrap the

power adaptor cord around the cord hook as shown in the illustration below (this helps keeping

the plug from being accidentally pulled out).

CAUTION

• Don't let the cord bend sharply or kink when wrapping the cord around

the hook. An excessive bend can cut the cord or start a fire.

AC IN jack

Power adaptor cord

Cord hook