Yamaha Acoustic 사용자 설명서 - 페이지 32
{카테고리_이름} Yamaha Acoustic에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Acoustic 35 페이지. Yamaha acoustic guitar-accessory: supplementary guide
Yamaha Acoustic에 대해서도 마찬가지입니다: 소유자 매뉴얼 (1 페이지), 설치 매뉴얼 (11 페이지), 보충 설명서 (32 페이지)
페이지 인쇄
Error Messages
One of the following messages may appear in the MAGICSTOMP's display if an error
occurs during operation. If so, please stop operation and check the following points to find
a solution to the problem.
Trouble Shooting
• No Sound
Is the power adapter properly connected?
Is the volume control on the instrument connected to the INPUT jack turned up?
Is the volume knob set to "0"?
Is the effect's output level set to "0"?
• Sound level is low
Switch the input level to the "HIGH" position. (
• Effect is not active
Is the effect's output level set to "0"?
Is the effect switched OFF (all lamps are off)?
• Can not change to another patch
Check the display. If the MAGICSTOMP is in its Tuner Mode (
(
P.20) you can not change to another patch.
• Adjusting the control knob has no effect on the sound
Rotate the knob until the value shown on the display changes, and then try setting. (
32
The data being bulk transmitted is damaged. After restoring
(overwrite, store, etc.) the user patch data that corresponds
to the patch number, try transmitting the data again.
An error occurred while transmitting data. Check the USB
cable connection, computer settings, etc.
An error occurred while transmitting or receiving bulk data.
Check the USB cable connection. Also, if the error occurs
about halfway through the operation, setting the interval speed
to a slower setting sometimes solves the problem.
The hardware is damaged. Please contact the dealer from
whom you purchased the product.
P.10)
P.24) or Name Edit Mode
P.14)