Yamaha Arius YDP-105 미디 레퍼런스 - 페이지 2

{카테고리_이름} Yamaha Arius YDP-105에 대한 미디 레퍼런스을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Arius YDP-105 3 페이지.
Yamaha Arius YDP-105에 대해서도 마찬가지입니다: 소유자 매뉴얼 (24 페이지)

페이지 인쇄

MIDI Functions

When this instrument and a computer are connected with a USB cable, MIDI communication can be performed. The

explanations here cover the settings necessary for performing MIDI communication between both devices.

For instructions on how to connect this instrument to the computer, refer to the "Computer-related Operations"

downloadable from the Yamaha Downloads website.

MIDI Settings

Setting the MIDI Transmit Channel

In any MIDI control setup, the MIDI channels of the transmitting and receiving devices must

be matched for proper data transfer. You can specify the channel on which this instrument

transmits MIDI data. To do this, while holding down [GRAND PIANO/FUNCTION], press one

of the A6–B6 keys. The A6 key decreases the value by 1, the B6 key increases the value by

1, and the A#6 key restores the default value (channel 1).

Setting range: 1–16

Default value: 1

Other MIDI Settings

The MIDI settings other than the Transmit Channel are set as listed below, and cannot be

changed.

• MIDI Receive Channels:

• Local Control:

• Program Change Transmit/Receive: Yes

• Control Change Transmit/Receive: Yes

Voice List

Voice Name

Grand Piano

Bright Grand

Stage E.Piano

DX E.Piano

Organ Principal

Organ Tutti

Harpsichord 8'

Harpsichord 8'+4'

Vibraphone

Strings

* When you specify a program change as a number in the range of 0–127, specify a number that is one less than the

program change number listed above. For example, to specify program change number 1, you would specify a value

of 0.

All channels (1–16)

MSB

LSB

108

A#6 (Default)

A6 (−1)

Highest key

B6 (+1)

Program Change number

(1–128)

In Dual, the keyboard

performance via Voice 1 is

transmitted on the specified

MIDI Transmit Channel and the

keyboard performance via

Voice 2 is transmitted on the

next channel number in

sequence (specified channel +

1).

No MIDI messages are output

during playback of the Demo

Song or Preset Song.

For information on program

change numbers for each of

the Voices of the instrument,

see the "Voice List" below.

YDP-105 MIDI Reference