Yamaha Arius YDP-135 소유자 매뉴얼 - 페이지 31

{카테고리_이름} Yamaha Arius YDP-135에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Arius YDP-135 36 페이지. Owner's manual
Yamaha Arius YDP-135에 대해서도 마찬가지입니다: 참조 (6 페이지), 빠른 작동 매뉴얼 (2 페이지)

페이지 인쇄

Keyboard Stand Assembly

CAUTION

• Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble in accordance

with the sequence given below.

• Assembly should be carried out by at least two persons.

• Assemble the stand on a hard and flat floor with ample space.

• Be sure to use the included screws only, and insert screws of the correct size in the correct hole locations. Use of

incorrect screws can cause damage or malfunction of the product.

• Be sure to tighten up all screws upon completing assembly of each unit.

• To disassemble, reverse the assembly sequence given below.

Have a Phillips-head (+) screwdriver ready for tightening

the screw securely.

Remove all parts from the package and make sure you

have all of the items.

Bundled pedal cord

inside

Assembly Parts

6 × 20 mm long screws × 4

6 ×16 mm short screws × 4

4 ×12 mm thin screws ×2

AC Power adaptor

4 × 20 mm tapping screws ×4

Cord holders × 2

Attach (finger-tighten) C to D and E.

1-2

1-3

1-1 Untie and straighten out the bundled pedal cord.

Don't discard the vinyl tie. You will need it later in

step 6.

1-2 Align D and E with each end of C.

1-3 Attach D and E to C by finger-tightening the long

screws

(6 × 20mm).

YDP-135 Owner's Manual

1-1